
- FEATURED PRODUCTS
- Solar Panels
- Solar Power Systems
- Productos Solares en Puerto Rico
- Charge Controllers
- Inverters
- Deep Cycle Batteries
- Solar Panel Mounts
- MORE PRODUCTS
- Cables & Wiring
- Enclosures, Electrical & Safety
- Heat Pump Water Heaters
- Inverter Power Panels & PreWired Systems
- Meters, Communications & Site Analysis
- Portable Power Systems
- Solar Water Pumps
- Voltage Converters
- Wind Turbines
- Books & Educational Videos
- * Clearance Sale *
- Hot Deals
Grid-Tied 3.9kW Residential Home Solar System with Battery Backup
Item code | Brand name | Model number |
KITGRIDBACK-4 | AltE | Grid-Tied w Backup 3.9kW |
Grid Tie with Battery Back-Up
3.9kW Solar Home System
The performance of each solar home system will vary greatly based on the location where it is installed. If you need help sizing a Solar Grid Tie system for your home, check out our On Grid System Calculator
Each of these solar home systems are designed to provide you with the main components you will need to equip your home with a grid-tied Solar system that includes a back up battery bank. altE's Home Solar Systems include the major components needed for a solar installation. Since each installation is unique, some parts/materials will need to be purchased separately to satisfy the needs of your specific project and local regulations. If you experience frequent power outages but want to keep your connection to the utility grid, one of these systems might be just the thing for you! From premium modules and racking systems, to efficient inverters and durable batteries, these packages include high quality, safe components for your solar installation. Also be sure to check out our Solar Rebates
page where you can look up your state - you can save as much as 50% or
more, in combination with the Federal incentives, on your installed
system!
Grid-Tied 3.9kW Home Solar System with Battery Back Up Includes: | ||
Part Number | Item Description | Quantity |
HEL360HSPE360B | Heliene 360 Watt Mono All Black Solar Panel | 11 |
PVCMC4-MF-30FT | 30' MC4 Connector Cable #10 AWG |
1 |
PVCMC4-MF-50FT | 50' MC4 Connector Cable #10 AWG |
2 |
PVCMC4-MF-100FT | 100' MC4 Connector Cable#10 AWG | 2 |
GENMC4KEY | Disconnect Key for Solar Panel Connector Cables | 1 |
TWOXR100132A | IronRidge XR100 Rail, 11 Feet, Mill Finish |
4 |
TWOXR10084A | Ironridge XR100 Rail, 7 Feet, Mill Finish |
4 |
TWOXR100CAP | IronRidge End Cap for XR-100 Rails | 4 |
TWOXR100-BOSSM1 | IronRidge Splice Kit for XR-100 Rails | 4 |
TWOFLASHVUEM1 | IronRidge FlashVue Flashing | 20 |
TWOSQUAREBOLT | IronRidge Square Bonding Hardware | 20 |
TWO29-4000-077 | XR Rail Wire Clips (Bag of 20) | 1 |
TWOUFOSTP40MMB1 | Ironridge UFO Stopper End Clamp | 10 |
TWOUFOCLMPBK | Ironridge UFO Mid Clamp , Black | 26 |
TWOGDLUG | IronRidge Grounding Lug w/Hardware | 2 |
MIDMNPV6 | Midnite Solar MNPV6 Combiner Box | 1 |
GENSR-2HOLES-LN | 1/2" Strain Relief 2 Round Holes/Locknut | 5 |
GENSR-1HOLE-LN | 1/2" Strain Relief 1 Round Holes/Locknut | 1 |
GENBRKDIN-20 | Midnite Solar 20A Din Rail Breaker, 150VDC | 5 |
MIDMNSPD-300 | Midnite Solar Surge Protection Device - 300V | 1 |
OUTFW-CCB | Outback Power FlexWare Side Mount Charge Controller Bracket | 1 |
OUTGSLC175-PV1 | Outback Power PreWired GSLC One 175A Disco PV120/240 | 1 |
OUTFW-FLEXMAX80 | Outback Power Flexmax 80 MPPT Solar Charge Controller | 1 |
OUTFW-MB3 | Outback Power Mate 3 Side Mounting Bracket | 1 |
OUTHUB-4 | Outback Power HUB-4 Communication Manager | 1 |
OUTGS4048A1 | Outback Power 4000W GS4048A Inverter | 1 |
OUTMATE3S | Outback Power MATE3s System Controller | 1 |
KLV2100PLC | KiloVault 2100Wh 12V Advanced AGM Battery | 8 |
ALTBC-2/0-120RB | Battery to Inverter Cables,2/0, 10Ft, Pair | 1 |
ALTBC-2/0-24B | Battery Interconnect Cable,2/0 24",Black | 1 |
ALTBC-2/0-24R | Battery Interconnect Cable,2/0 24",Red | 1 |
HLRWESHLBL17 | Electric Shock Hazard Label | 4 |
HLRPVPOWSRC | Photovoltaic Power Source | 5 |
HLRMAXVOLT17 | Max Voltage Max Current Label | 1 |
HLRDCDISCT | Photovoltaic DC Disconnect Label | 1 |
HLRACRATING | Inverter AC Rating Label | 1 |
HLRACDISCT | Photovoltaic AC Disconnect Label | 1 |
HLRELECSHKDC17 | 2017 NEC Label - Warning Electric Shock | 1 |
HLR14TURNOFFPV | 2014 Turn Off PV Before Working | 3 |
HLRPVACDIS17 | 2017 PV System AC Disconnect Label | 3 |
HLRMPVSD | Main PV System Disconnect Label | 2 |
HLR14DUALPOWER | 2014 Warning: Dual Power Source | 2 |
HLRRAPID2017 | 2017 NEC Rapid Shutdown Label | 1 |
HLRRAPID | 2014 NEC Rapid Shutdown Label | 1 |
HLRPOWSRC17 | 2017 Warning: Power Source Output | 1 |
Outback Power
Radian GS4048A 4000W Inverter/Charger

Additionally, it has Advanced Battery Charging which allows it to support advanced technologies such as Lithium-Ion batteries and Grid Zero technology which makes it possible for a smaller inverter/battery system to perform like a much larger one, when required.
Features of Radian A Series include:
- Grid-Interactive and Stand alone capability in the same package
- GridZero Technology optimizes the balance between stored and renewable energy sources - minimizing grid dependence and allowing users to get the most out of their investment
- Advanced Battery Charging (ABC) supports leading edge technologies including lithium-ion
- Simplified stacking design for flexibility to upgrade to a 12kW system
- Field adjustable input/output voltage and frequency boundaries
- 120/240V Split-Phase Voltage
- Dual AC inputs
Solar Charge Controller

Features of FlexMax 80 MPPT Charge Controller include:
- Advanced Continuous Maximum Power Point Tracking Algorithm
- Increases PV Array Output by up to 30%
- Battery Voltages from 12 VDC to 60 VDC
- Automatic Battery Voltage Detection at Start Up
Batteries

The KiloVault 2100 PLC is a pure lead carbon sealed AGM deep cycle solar battery, for cycling applications. KiloVault 2100 PLC is a cost-effective, maintenance-free battery that offers superior performance in Partial State Of Charge (PSoC) applications, combining pure lead and advanced carbon technology for extended battery life and rapid charging. The batteries are designed for residential or light commercial off-grid, backup, or self-consumption applications.
This home solar system includes (8) 12V, 180Ah batteries, which will be wired together for a 48V, 360Ah, or 16.8kWh battery bank. Deep cycle batteries should not be discharged lower than 50%, so a battery bank of this size will provide approximately 4200 Watt hours (Wh) of energy per day, for two days when fully charged. This is a rough estimate of capacity, actual capacity can change based on temperature, state of charge and the condition of the batteries. Additional batteries can be added to this system to increase the capacity of the battery bank.
Our grid tie with battery back up home solar systems include the basics that you'll need for your solar installation. In this table, we've listed a few more items that you may want to include with your package order. If you are interested in auto generator starts, mounting standoffs, or additional batteries and cables, this is the place to find them.
Recommended Package Add-Ons | |
Part Number | Item Description |
KLV2100PLC | KiloVault 2100Wh 12V Advanced AGM Battery |
OUTIBR-2-48-175 | 2 Shelf Integrated Battery Rack |
EFEELITE | Efergy Energy Monitor for Home Energy Usage |
* To take a look at technical spec pages, installation manuals, warranty information, etc. click on the 'Documents' tab towards the top of this page
This item is a package made up of the following components. Please call to speak to a sales representative to learn about other options which may be available.
- 11 x Heliene 360 Watt Black Mono Solar Panel
- 2 x Staubli 100' MC4 Connector Extension #10 AWG
- 2 x Staubli 50' MC4 Connector Extension #10 AWG
- 1 x Multi-Contact 30' MC4 Connector Extension #10 AWG
- 1 x Disconnect Key for Staubli MC4 Connectors
- 4 x Ironridge XR-100 Rail, 11 Foot Section, Clear
- 4 x Ironridge End Cap for XR-100 Rails - Pair (Left/Right)
- 4 x IronRidge XR100 Rail, 7 Foot Section (AltE Custom Cut), Clear
- 4 x IronRidge XR-100 BOSS Bonded Structural Splice
- 20 x Clear (Mill) IronRidge FlashVue
- 20 x Bonding Hardware, Square, for FlashFoot 2 and L Foot, Each
- 1 x Ironridge XR Rail Wire Clips (Bag of 20)
- 26 x IronRidge Universal Fastening Object (UFO), Black , Each
- 10 x IronRidge XR Stopper Sleeve, 40MM, Black, EACH
- 2 x IronRidge XR Grounding Lug w Hardware, Each
- 1 x Outback Flexmax 80 MPPT Solar Charge Controller
- 1 x Outback Radian GS4048A 4kW, 48V 120/240VAC Inverter/Charger (UL1741-SA)
- 1 x Outback Power MATE3s System Display and Controller
- 1 x Outback FW-MB3 Mate 3 Side Mounting Bracket
- 1 x Outback Hub-4 Communication Manager, 4 Port
- 1 x Outback Power PreWired GSLC with (1) 175A Disconnect, 120/240VAC
- 1 x Outback Mounting Bracket for 1 Side Mounted Charge Controller
- 8 x KiloVault 2100 PLC 2100Wh 180 Ah 12V Advanced AGM Battery
- 1 x Battery to Inverter Cables, 2/0 AWG 10Ft (120"), Red/Black Pair
- 1 x Battery Interconnect Cable, 2/0 AWG 24", Black
- 1 x Battery Interconnect Cable, 2/0 AWG 24", Red
- 1 x Midnite Solar MNPV6 Combiner Box
- 1 x 1/2 Inch Single Hole Strain Relief with Lock Nut
- 5 x 1/2 Inch 2 Hole Strain Relief with Lock Nut
- 5 x 20 Amp 150VDC Din Rail Mount Breaker
- 1 x Midnite Solar Surge Protection Device 300VDC and 120/240 VAC
- 1 x NEC 2017 Compliant Label: Warning - Electrical Shock Hazard - DC Voltage
- 3 x NEC 2014 Compliant Label: Turn off Photovoltaic AC Disconnect
- 3 x NEC 2017 Compliant Label: PV System AC Disconnect Label
- 4 x NEC 2017 Compliant Label: Warning - Electrical Shock Hazard
- 2 x NEC 2011 Compliant Label: Main PV System Disconnect Label
- 5 x NEC 2020 Compliant Label: Photovoltaic Power Source
- 1 x NEC 2011 Compliant Label: Photovoltaic DC Disconnect Label
- 2 x NEC 2014 Compliant Label: Warning -Dual Power Source
- 1 x NEC 2011 Compliant Label: Inverter AC Rating Label
- 1 x NEC 2017 Compliant Label: Maximum Voltage Label
- 1 x NEC 2011 Compliant Label: Photovoltaic AC Disconnect Label
- 1 x NEC 2017 Compliant Label: Rapid Shutdown Switch
- 1 x NEC 2014 Compliant Label: Photovoltaic System Equipped With Rapid Shutdown
- 1 x NEC 2017 Compliant Label: Warning - Power Source - Do Not Relocate