Outback Power GS Load Center for Radian Series Inverters

Outback Power Prewired GSLC 175A Disconnects, 120/240VAC

Outback Power PreWired GSLC 175A Disconnects, Dual PV Disconnects, 120/240VAC

Outback Power PreWired GSLC with (1) 175A Disconnect, 120/240VAC

Outback Power PreWired GSLC 175A Disconnects, Dual PV Disconnects, 230 VAC

Outback PreWired 300 Vdc GSLC 175A Discos Dual

Outback Power
GS Load Center
For Radian Series GS Inverters

The GSLC is Outback's breaker box that allows it to be fully integrated with their inverters.  It is a balance-of-systems enclosure intended to work with the Radian Series (GS) inverter/chargers, FLEXmax Charge Controllers, and OutBack HUB Communications Manager.

The GS Load Center is available in FOUR different options:

• GSLC - This is a basic or "empty" version of the GSLC.  Recommended for custom-built or large scale systems, almost all components need to be purchased/installed separately.*  Breakers are not included.  One GSLC per inverter.
  
• GSLC175-120/240 - For standard split-phase systems in N. America. AC Breakers are included.  Factory prepared with dual 175A inverter breakers, dual AC inputs and AC maintenance bypass. Ideal for systems with a single Radian inverter and an AC power source but can be customized in other ways.  230VAC version also available for European markets.
  
• GSLC175PV-120/240  and GSLC175PV1-120/240 - The 'PV' version of the GSLC comes with both AC and DC breakers.  PV models are for the larger Radians, and PV1 models are for the smaller Radians.  Factory prepared with dual 175A inverter breakers, dual AC inputs, AC maintenance bypass, PV GFDI, and two PV array inputs, FLEXnet DC battery monitor and three shunts. “Plug and play” for systems which have a single Radian inverter and two charge controllers and need battery monitoring.  230VAC version also available for European markets.
• GSLC-PV-300VDC and GSLC-PV1-300VDC- This is the load center for the FLEXmax 100 MPPT charge controller.  It does not have GFDI, as the FM100 has ground fault built in.
  

*The following components are sold separately for the basic GSLC:

• Inverter Main Disconnects (required for inverter installations)
• AC Maintenance Bypass Assembly
• AC Terminal Bus Bars (TBBs)
• DC and AC Circuit Breakers
• PV Ground Fault Detector-Interrupter (GFDI)
• FLEXnet DC Battery Monitor
• Additional DC shunts and GS-SBUS (if desired)