SHOP ALL PRODUCTS
- FEATURED PRODUCTS
- Solar Panels
- Solar Power Systems
- Productos Solares en Puerto Rico
- Charge Controllers
- Inverters
- Deep Cycle Batteries
- Solar Panel Mounts
- MORE PRODUCTS
- Cables & Wiring
- Enclosures, Electrical & Safety
- Inverter Power Panels & PreWired Systems
- Meters, Communications & Site Analysis
- Portable Power Systems
- Solar Water Pumps
- Voltage Converters
- Wind Turbines
- Books & Education
- * Clearance Sale *
- Hot Deals
- Open Box & Refurb Deals
APsmart RSD-S-PLC Module Rapid Shutdown Device
APsmart Single Core Transmitter PLC, 150mm Core Line
APsmart Single Core Transmitter PLC, Outdoor Kit
APsmart RSD Start Kit
Model:
RSD-S-PLC (RSD-S-PLC)
TRANSMITTER-PLC (single) (TRANSMITTER-PLC)
TRANSMITTER-S OUTDOOR (TRANSMITTER-PLC Outdoor)
RSD-START-KIT (RSD Start Kit)
Select model:| Item code | Brand name | Model number |
| APSRSD-S | APsmart | RSD-S-PLC |
| Item code | Brand name | Model number |
| APSTRANSMIT-S | APsmart | TRANSMITTER-PLC (single) |
| Item code | Brand name | Model number |
| APSTRANSMIT-S-O | APsmart | TRANSMITTER-S OUTDOOR |
| Item code | Brand name | Model number |
| APSRSDSTART | APsmart | RSD-START-KIT |
APsmart Rapid Shutdown Solutions
APsmart is the brand brought to us by designers at APsystems. The solutions offer state-of-the-art PV module level rapid shutdown devices that work seamlessly with any new or existing string or central inverter system. The RSD-S-PLC meets SunSpec requirements, maintaining normal function of the PV system by continually receiving a heartbeat signal from the APsmart Transmitter. When no signal is present, the unit executes rapid system shutdown. This solution meets U.S. NEC 2017 & 2020 690.12 Rapid Shutdown requirements. By maximizing APsystems’ proven expertise in module-level power electronics, APsmart solutions are powered by ASIC with internal IP and integrated with TI chips at the system-level application.
APSmart pv module level rapid shutdown at a Glance
- Safe - Meets NEC 2017 and 2020 (690.12), and SunSpec requirements
- Reliable - Highly integrated SoC and fewer electrical components
- Flexible - Small and lightweight, can be adhesive or rack mounted
- Powerful - Longer daily module operating time due to low minimum operating voltage (8v), and low power consumption
- Stable - Eliminates unwanted AFCI nuisance tripping and noise
APsmart RSD-S-PLC Installation Video:
| Specification: | RSD-S-PLC |
| Input Operating Voltage Range | 8 - 80Vdc |
| Max Continuous Input Current (Imax) | 15A |
| Max Short Circuit Current (Isc) | 25A |
| Output Operating Voltage Range | 8 - 80Vdc |
| Max System Voltage | 1500Vdc |
| Max Series Fuse Rating | 30A |
| Operating Ambient Temperature Range | -40 to 185°F (-40 to 85°C) |
| Dimensions (w/o cable and connectors) | 5.5 x 1.3 x .7 inches (140 x 32 x 18 mm) |
| Cable Length | Input 9.8 inches (250 mm) Output 47.25 inches (1200 mm) |
| Cable Cross Section Size | 12AWG (UL) |
| Connectors | Input: Staubli MC4 Output: APsystems |
| Enclosure Rating | NEMA Type 6P/IP68 |
| Protection Temperature | 212°F (100°C) |
| Communication | Power Line Communications (PLC) |
| Safety Compliance | NEC 2017 and 2020 (690.12); UL1741; CSA 22.2 No 330-17; IEC/EN62109-1; 2PFG2305 |
| Specification: | TRANSMITTER-PLC | TRANSMITTER-PLC-OUTDOOR |
| Input Voltage | 12Vdc | |
| Input Current | .8A | |
| Power Supply | Not included - Residential or Commercial available options | |
| Core Size | Single Core- 29 mm - with 150 mm Core line (*NOTE: Images show Dual Core. We are stocking the Single Core) |
|
| Max System Voltage | 1500Vdc | |
| Max Current per Core | 150A | |
| Iternal Opening for Wires/Outside Dimensions | -29mm/65mm | |
| Max Supported PV Modules per String | 30 | |
| Number of Strings per Core | 15 | |
| Operating Temperature | -40 to 100°C | -40 TO 60°c |
| Dimensions (W x H x D) | 90 x 35 x 40 mm | 198.5 x 298 x 179 mm |
| Enclosure Rating | IP30 | IP65 |
| Communication | Power Line Communications (PLC) | |
| Safety Compliance | NEC 2017 and 2020 (690.12); UL1741; CSA 22.2 No 330-17 | |
APSmart testing kits at a glance
- RSD-Start Kit needs to be linked in the system and tested with a PV Analyzer to test the IV curve and to ensure the components are working properly
- RSD-Eye+ is a small handheld device used to sense pulse modulation from the Power Line Communication (PLC) signal between the Transmitter and the RSD
| Specification: | RSD-START-KIT |
| Input Operating Voltage | 12Vdc |
| Input Operating Current | .8A |
| Power Supply Interface | 5.5 x 2.1mm DC Power Plug |
| Operating Ambient Temperature Range | -40 to 60°C |
| Enclosure Rating | IP30 |
| Dimensions/Weight | 125 x 125 x 75 mm/550 g |
| Specification: | RSD-EYE+ |
| Input Operating Voltage | 9Vdc |
| Input Operating Current | .1A |
| Operating Ambient Temperature Range | -40 to 60°C |
| Enclosure Rating | IP20 |
| Dimensions/Weight | 136 x 42 x 26 mm/240 g |
Add-Ons
Add-Ons
Add-Ons
Add-Ons
Add-Ons
Add-Ons
