|Item code||Model number||Volts||Watts||Cell Tech||Connector Type|
Multicrystalline Solar Module
Kyocera´s advanced cell processing technology and automated production facilities have produced a highly efficient multicrystalline solar panel. These cells are encapsulated between a tempered glass cover and an EVA pottant with PVF back sheet to provide maximum protection from the severest environmental conditions. The entire laminate is installed in an anodized aluminium frame to provide structural strength and ease of installation.
|Maximum Power||10 Watts|
|Maximum Power Voltage||16.9 Volts|
|Maximum Power Current||0.60 Amps|
|Open Circuit Voltage||21.5 Volts|
|Short-Circuit Current||0.62 Amps|
Note: The electrical specifications are under test
conditions of Irradiance of
1 kW/m2, Spectrum of 1.5 air mass and cell temperature of 25ºC
|Length||11.97" (304 mm)|
|Width||13.86" (352 mm)|
|Depth||0.87" (22 mm)|
Great little solar panel. I have seen it produce up to 13W on some summer days during my testing. I have no complaints. It is a very small (10W) panel, so make sure its adequate for your setup/system.
Do you own this product? Write a review