
- FEATURED PRODUCTS
- Solar Panels
- Solar Power Systems
- Productos Solares en Puerto Rico
- Charge Controllers
- Inverters
- Deep Cycle Batteries
- Solar Panel Mounts
- MORE PRODUCTS
- Cables & Wiring
- Enclosures, Electrical & Safety
- Heat Pump Water Heaters
- Inverter Power Panels & PreWired Systems
- Meters, Communications & Site Analysis
- Portable Power Systems
- Solar Water Pumps
- Voltage Converters
- Wind Turbines
- Books & Educational Videos
- * Clearance Sale *
- Hot Deals
Outback Power FlexWare 250 Surge Protector
Item code | Brand name | Model number |
OUTFW-SP-250 | Outback | FW-SP-250 |
Outback Power Systems
FLEXware Surge Protector
FW-SP-ACA, FW-SP-250 & FW-SP-R
The OutBack Power Systems FLEXware Surge Protector is the newest seamlessly
integrated balance-of-system component for the FX Series Inverter/Charger. The
FLEXware Surge Protector was designed by OutBack engineers specifically for
OutBack FX Series Inverter/Chargers, and provides multiple levels of protection for
the vital electrical components of the Inverter/Charger in the event of an electrical
surge or nearby lightning strike. The sophisticated design allows for both AC and
DC protection on multiple circuits (two AC and one DC) via thermally fused Metal
Oxide Varistors (MOVs). LED visual indicators provide at-a-glance status monitoring
allowing system users to determine FLEXware Surge Protector operational status in
real-time. The FLEXware Surge Protector is designed to operate between 120-240
VAC at 50/60 Hz and 12-48 VDC. Its multiple mounting configurations allow it to be
incorporated into any OutBack system. The FW-SP-ACA mounts inside the FW-ACA
(AC Conduit Adapter) for FLEXware 500 and 1000 systems, while the FW-SP-250 is
designed to mount inside the FLEXware 250 AC Side Breaker Enclosure allowing for
quick installations that keep your system protected and looking great.
The OutBack Power Systems FLEXware Surge Protector is the only choice when you want to protect your FX Series Inverter/Charger from the harmful effects of transient power surges. Ease of installation and seamless integration make it the obvious addition to your OutBack system.
Features:
- Affordable, "All-In-One", AC Input, AC Output and DC Surge Protection
- Easy to Install/Seamless Integration with FLEXware
- At-A-Glance Visual Verification of Protection Level
- Engineered and Manufactured by OutBack Power Systems
- Designed Specifically for FX Series Inverter/Chargers
FLEXware Surge Protector Specifications | ||||
---|---|---|---|---|
Nominal Voltage |
||||
Voltage Protection Level | 390VAC/150VDC |
|||
AC or DC |
AC/DC |
|||
Maximum Surge Current (8/20µs) |
30kA per circuit |
|||
Energy Rating | 2500 joules |
|||
Frequency | 50/60 Hz |
|||
Protection Type |
Thermally Fused MOV |
|||
Number of Protected Circuits | 2 AC / 1 DC | |||
Mounting |
FW-500 or FW-1000 |
FW-250 |
Replacement Board (FW-SP-ACA, FW-SP-250) | |
Weight | Unit Shipping |
1 lbs 4 oz (.57 kg) 2 lbs 2 oz (.96 kg) |
1 lbs 2.5 oz (.52 kg) 2 lbs (.91 kg) |
7.5 oz (.21 kg) 1 lb 2.2 oz (.516 kg) |
Dimensions (H x W x L) |
Unit Shipping |
8.5 x 6.75 x 2.5" (21.59 x 17.15 x 6.35 cm) 10.13 x 9.13 x 5.75" (25.72 x 23.2 x 14.6 cm) |
5.5 x 6.5 x 7.5" (13.97 x 16.51 x 19.05 cm) 10 x 7.25 x 6" (25.4 x 18.42 x 15.24 cm) |
7.75 x 5.5 x 1.5" (19.69 x 13.97 x 3.81 cm) 9.38 x 7.25 x 2.5" (23.81 x 18.42 x 6.35 cm) |