Solar Panel Size: What You Need to Know as Large Solar Panels Go XL

Note that unless otherwise noted, this article focuses on solar panels utilizing crystalline silicon (c-Si) cells – by far the most common type of cell currently used in solar panel manufacturing.

It's no surprise that as solar PV has become mainstream over the past 30 years, improvements in technology have led to tremendous gains in the power a single solar panel can produce. What is a surprise is that during that time, solar panels' dimensions haven't increased all that much despite gains of over 7x in a single PV panel's power output. This speaks to the facts that:

  • Because solar panels are really just collections of PV cells, a solar panel’s power output is primarily determined by:
    1. How many PV cells the panel contains, and
    2. The efficiency of those cells
  • A solar panel's dimensions (physical size) are primarily determined by:
    1. How many PV cells the panel contains, and
    2. The size of the silicon wafers used in those cells

Small, Medium, Large, and Extra Large Size Solar Panels

Before we get too specific, let's get generic. There are no formal definitions or hard and fast rules around solar panel size and what makes a particular module …8220;small…8221;, …8220;medium…8221;, …8220;large…8221;, or …8220;extra large.…8221; But from a freight shipping standpoint, anything over 8 linear feet generally incurs an over-dimension surcharge, so we’re going to use that as the threshold for …8220;extra large…8221; solar panels. Note that because we're talking about shipping here, an item slightly smaller than 8…8242; will incur an over-dimension charge if the pallet it ships on (including the packing material used to protect it) measures over 8…8242; (this is precisely the case with the Q CELLS DUO XL-G10 475/480W modules, coming soon to altE Store).

Generally speaking, this means that we can think about early-generation solar panels (which typically feature 36 cells) as …8220;small…8221;, the 60- and 72-cell modules that have dominated the industry for the last decade as …8220;medium…8221; and …8220;large…8221;, and modules with more than 72 cells as …8220;extra large…8221;.

a chart comparing small, medium, large, and extra large solar panels
Click the image to enlarge.

Of course, there are exceptions to many rules, and we do have a few here. Please note that:

  • Many solar panels today use half-cut cells to reduce resistive power loss and are often marketed as having 120 or 144 cells, but are in effect still 60- or 72-cell modules and would therefore fall into our medium or large size categories. Although…8230;
  • Some 72-cell panels utilizing M6 or larger wafers are XL solar panels by our length-based definition (see below for more on wafers).
  • Interestingly, some 96-cell panels are not long enough to incur over-dimension shipping fees because their cell arrangements are 12…215;8 and not 16…215;6 – meaning they are not longer than 72-cell panels, just wider.

In summary, solar panels over 8…8242; in length (or panels that ship on pallets over 8…8242; in length) are considered extra large solar panels.

What to Know About Extra Large Size Solar Panels

Extra large solar panels have implications for installers and DIYers planning PV systems. Though not overly common yet, XL size solar panels are here to stay. What does this mean for you?

  • It is not possible for someone to install them – or even move them around – without the help of at least one other person. Plan your installation accordingly!
  • It is not possible to lay them flat in a 7…8242; truck bed and be able to close the tailgate.
  • They are long enough that they incur an over-dimension fee from most freight companies, meaning shipping is more expensive – particularly when ordering in small quantities.
  • They are also long enough that fork extensions are needed to move pallets of them with a forklift.
  • Their additional weight and length compared to medium and large panels may require different racking products and configurations than you’re accustomed to.
  • Though the width and especially the length dimensions are increasing, there's no indication that the thickness of modules' frames will be increasing (and no reason we should expect them to), meaning the same widely-available, time-tested solar panel clamps that have been on the market for years will continue to be compatible with extra large solar panels.

How Did Solar Panels Get so Big?

PV cells' efficiency has improved slowly and steadily over the last few decades. In the mid-1990s, efficiencies approaching 15% were at the cutting edge of solar cell technology. Today, efficiencies of 29% have been achieved in laboratory conditions, while numbers in the low 20% range are becoming the standard for modern commercially available modules. We are likely to see more efficiency improvements in the coming years before the theoretical efficiency limit of single-junction c-Si based cells at around 30% (known as the Shockley-Queisser limit) becomes a real obstacle.

ingots of pure silicon on the left and assembled solar PV cells on the right
Raw silicon is melted and shaped into long ingots, which are then sliced into paper-thin wafers that form the backbone of solar PV cells.

PV cell efficiency improvements have come in many forms, but the one related to the physical size of the cell is the silicon wafer the cell is built around. In the 1980s and early 1990s, wafers measuring 100mm square were the standard size. In the mid-1990s, 125x125mm wafers became the new standard, and those were eventually replaced by 156x156mm wafers (which was known as an …8220;M0…8221; wafer and thus began a new silicon wafer naming convention that currently extends all the way to 217…215;217 mm wafers known …8220;M12+…8221;).

In tandem with the increase in solar cell efficiency (and size), the number of cells per module has also increased over time. 36-cell modules were the first standard size, and are still commonly used as 12V …8220;off-grid…8221; panels. 60-cell modules eventually became the standard and are still being manufactured today, with 72-cell modules eventually becoming an additional standard – and the go-to for commercial and utility-scale solar projects.

Today, with consumers' ever-increasing demand for electricity and incremental improvements in solar cell power production, we are seeing more and more powerful panels hit the market. Generally speaking, this is a good thing for consumers as it can facilitate lower system costs on things like racking, mounting, and balance of system components – so long as the increased costs of shipping and labor are carefully considered when purchasing extra large solar panels.

Sources

https://authors.library.caltech.edu/15045/1/JPL-FSA-10-YEARS-OF-PROGRESS.pdf
https://blog.ibc-solar.com/2019/12/from-m0-to-m12-different-wafer-sizes-in-the-market/
https://sinovoltaics.com/solar-basics/solar-cell-production-from-silicon-wafer-to-cell/
https://www.pv-magazine.com/2022/02/15/hanwha-q-cells-begins-selling-its-solar-panels-based-on-m6-wafers-in-europe/

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.