SunRotor SR-26 Submersible Pump with M100T Controller

SunRotor Solar Products
SR-26 Centrifugal Submersible Solar Pump
with SRC-M100T Controller

The new SunRotor Centrifugal Submersible Solar Pumps allows for maximum functional lift capability of up to 130 feet. Powered by solar, battery, or a combination of the two, maximum flow at surface level is 32.6 gallons/min. The submersible motor is protected from ambient water by an oil-filled jacket (utilizing food-grade oil that protects the potable water source if vessel is compromised). These submersible water pumps offer a broad range of pumping capabilities with greater water pumping depths and higher volumes of water. These pumps must be used with the SunRotor Controller, in order to avoid pump failure, and void the pump warranty. 5 Year Warranty in US, 2 Year Warranty outside the US.

Kit Includes: Pump, Controller, Low Water Sensor, Check Valve Assembly, and Wire Splice Kit.

APPLICATIONS:

Livestock watering

Water for remote areas

Irrigation

SR-26 PUMP FEATURES:

Nominal 48 volt operation

Usable voltage range 24 - 48

Power range 285 watts to 1140 watts

Powered by solar, battery or a combination of the two

Maximum functional lift capability of 100 ft (31 m)

Max flow at surface level is 32.6 gallons/min with 556 watts and 70.8 volts PV input

Highly reliable, single moving part progressive cavity technology

Readily repairable in the field

1 1/4 inch FNPT output

Designed for submersible operation up to 100 ft (submersion limit of 100 ft below static water level - ie. 100 ft submersion + 50 ft static water level = 150ft)

4" diameter (102 mm) fits 4.5" (114 mm) casing; 21" in height (53.3 cm)

Light weight - 19.5 pounds (8.85 kg)

Submersible motor protected from ambient water by oil filled jacket (food grade oil protects potable water source if vessel is compromised)

Brushless DC motor technology avoids conventional DC brush maintenance and replacement

All electronics are mounted above ground for longer life and easy access

Entire pump body is stainless steel to comply with all local code and pump installation requirements

CE Certified and ISO 9001

M100T CONTROLLER FEATURES:

State of the art controller electronics contained in NEMA standard (weatherproof) conduit connection box

Clear cover allows visible inspection of connections and of LED status lights

MPPT and current booster technology incorporated - converting excess voltage into amperage

Wide operational range with max input voltage tolerance of 100 volts (DC)

Battery or solar capabilities with low voltage cutoff for battery protection

Wired for low water cutoff and for tank-full float cutoff switches

Fully adjustable speed control is easily accessed through a hinged, snap hasp cover

Housed in a highly durable metal box with cooling fins cast in the back

Designed to be attached to same mounting pole as solar panels - minimizing lengths and gauge sizes of wiring harness to connect solar panels to controller

PUMP DIAGRAM:

1 - PV Panel Array

2 - Solar Module Rack

3 - Water Pipe

4 - Well Seal Assembly

5 - Low Water Sensor (not included - need to purchase separately)

6 - Submersible Pump

7 - Conduit & Wiring Harness from Controller to Well Seal

8 - Wiring Harness from Controller to Solar Modules

9 - DC Input Controller

10 - Tank Full Tethered Float Switch and Weight

11 - Anti-freeze Bleeder Valve

12 - Check Valve