- FEATURED PRODUCTS
- Solar Panels
- Solar Power Systems
- Productos Solares en Puerto Rico
- Charge Controllers
- Deep Cycle Batteries
- Solar Panel Mounts
- MORE PRODUCTS
- Cables & Wiring
- Enclosures, Electrical & Safety
- Heat Pump Water Heaters
- Inverter Power Panels & PreWired Systems
- Meters, Communications & Site Analysis
- Portable Power Systems
- Solar Water Pumps
- Voltage Converters
- Wind Turbines
- Books & Education
- * Clearance Sale *
- Hot Deals
- Open Box & Refurb Deals
msolar10BB Half-Cell, All-Black 410W Monocrystalline PERC Solar Panel
mSolar 410w 10BB Half-Cell Black Monocrystalline PERC PV Module
Available for Pre-order today!
With the rise in demand for solar panels, manufacturers are constantly innovating and improving their products to meet the needs of consumers. One such innovation is the PERC (Passivated Emitter and Rear Cell) technology, which has revolutionized the efficiency and performance of solar panels.
What is PERC Technology?
PERC technology is a type of solar cell design that improves the efficiency of solar panels by adding a passivation layer to the rear surface of the cell. This layer helps to reduce the recombination of electrons, which leads to a higher conversion rate of sunlight into electricity.
PERC technology has been around since the 1980s, but it has gained popularity in recent years due to its ability to increase the efficiency of solar panels without significantly increasing the cost of production. This has made it a popular choice for manufacturers and consumers alike.
Benefits of PERC Solar Panels
PERC solar panels offer several advantages over traditional solar panels, making them a top choice for those looking to invest in solar energy.
Higher Efficiency: PERC technology can increase the efficiency of solar panels by up to 25%, meaning that more sunlight is converted into electricity.
Improved Performance in Low Light Conditions: The passivation layer in PERC cells helps to reduce the recombination of electrons, making them more efficient in low light conditions.
Better Temperature Coefficient: PERC cells have a lower temperature coefficient, meaning that they are less affected by high temperatures, resulting in better performance in hot climates.
Longer Lifespan: The passivation layer also helps to protect the cells from degradation, resulting in a longer lifespan for PERC solar panels.
Introducing the mSolar 410w 10BB Half-Cell Black Monocrystalline PERC PV Module
The mSolar 410w 10BB Half-Cell Black Monocrystalline PERC PV Module is a high-performance solar panel that utilizes PERC technology to provide maximum efficiency and reliability. Let's take a closer look at its features and why it is a top choice for solar energy enthusiasts.
msolar 410w Solar Panel Tech Specs
|mSolar 410W - TXI10-410108BB
|Peak Power Watts (PMAX)
|Power Tolerance (PMAX)
|0 ~ +5
|Maximum Power Voltage (VMPP)
|Maximum Power Current (IMPP)
|Open Circuit Voltage (VOC)
|Short Circuit Current (ISC)
|Mono Perc, 182mm half cells
|Nominal Operating Cell Temperature (NOCT)
|42°C ± 2°C
|Temperature Coefficient of PMAX
|Temperature Coefficient of VOC
|Temperature Coefficient of ISC
|Maximum System Voltage
|Max Series Fuse Rating
|3.2mm, High Transmission, Low Iron & Semi-Tempered Glass
|IP68, 3 Diodes
|Staubli MC4 EVO2
|67.8 x 44.65 x 1.38 in
(1722 x 1134 x 35 mm)
|46.3 lb (21kg)
|# Modules Per Pallet
10 busbar technology increases power by decreasing the distance between busbars and the finger grid line
Improved weak illumination response
More power output even in lower light conditions such as overcast days or off-peak sunlight hours
Panels rigorously tested to limit power
degradation caused by 'stray' currents
High wind and snow resistance
5,400 Pa Snow Load
2,400 Pa Wind Load
M Solar modules are guaranteed to retain at least 84.3% of the initial power output