Enphase Energy Engage Cable 240VAC, 67" Connector Sections - Landscape

Enphase Energy
Engage Cable - M215 AC Trunk Cable
240VAC - 67" Spacing Between Connectors
Custom Cut Lengths - Per Connector
Landscape Orientation

The Engage Cable is a continuous length of 12AWG cable with pre-installed connectors for Enphase M215 Microinverters to plug into. The cable is handled like standard outdoor-rated electrical wire, allowing it to be cut, spliced and extended as needed.

AltE will custom cut this cable to give you the number of connectors needed for your installation. One connector is required for each Enphase M215 inverter in the system, additional connector lengths may be needed to reach additional module rows or junction boxes. Please see the 'Documents' section above for more details on sizing your Engage Cable.

Features

• Quick installation
• Large branch capacity
• No additional cables

These custom lengths of Engage Cable are ideal for modules being mounted in landscape orientation. If you need help estimating how much cable you will need for your project, please call our sales staff and they will be happy to help. (** NOTE: The maximum # of microinverters in an AC branch for 240V service is 17).

For more information on how the Engage cable is cut and installed, check out the video from Enphase below.