Universal Ub12350 12V, 35Ah (20Hr) Sealed Agm Batt

Universal Battery UB12350 Sealed AGM 12V 35AH

SEALED-LEAD ACID BATTERIES The state-of-the-art lead-acid battery is the valve-regulated type (sometimes called ‘sealed’ or maintenance-free), which fixes the acid electrolyte in a gel or in an absorptive fiberglass mat. The advantage of this design is that the battery needs no water additions, can be operated in any position, and can be used in close proximity to people and sensitive equipment. Universal Battery is a leader in competitively priced sealed absorbent glass mat (AGM) and gel technology. This new technology provides the following benefits compared to old technology wet batteries:

• Maintenance-free
• Sealed no leak design
• Higher cranking amps
• Lower self discharge
• Greater vibration resistance
• Heavy duty, no corrosion terminals

Specifications
Product Type:	Battery
Model No:	UB12350
Chemistry:	Sealed Lead Acid / AGM
Physical Specifications
Length (in.):	7.76
Width (in.):	5.12
Height (in.):	6.14 (7.09 with terminal)
Weight (lb.):	24
Case Quantity:	1
Electrical Specifications
Nominal Voltage:	12
Terminal:	B1-M5 bolt & nut
AH Cap @ 20 Hr Rate:	35
Applications
	Wheelchair

GEL Electrolyte is suspended in a silicia-based gel, which produces a thick pasty material.

AGM Electrolyte is suspended in fiberglass mat separators, which act as absorbent sponges.

Type	Model	Terminal	Nominal Voltage	AH Capacity 20 hr. rate	Length (in.)	Width (in.)	Height (in.)	Weight (lb.)
Gel	UB24	Z	12	75	10.25	6.63	9.25	50.1
Gel	UB27	Z	12	90	12.00	6.57	9.00	59
Gel	UB30H	FLAG	12	100	13.00	6.82	9.63	67
Gel	UB-4D	L-BLADE	12	200	20.50	8.13	10.00	132
Gel	UB-8D	L-BLADE	12	250	10.50	8.13	10.00	167
AGM	UB121100	FLAG/L-BLADE	12	110	13.00	6.75	10.50	71.1
AGM	UB12120	F1/F2	12	12	5.94	3.86	3.86	9.1
AGM	UB12260	B1	12	26	6.50	6.86	4.94	18.05
AGM	UB12350	L	12	35	7.69	5.13	7.00	24
AGM	UB12550	Z	12	55	9.00	5.44	9.00	38.5
AGM	UB12750	Z	12	75	10.25	6.13	9.13	54.5
AGM	UB12900	Z	12	90	12.00	6.63	9.06	63.4

Terminals:

• - A (Automotive Post)
• - Z (Automotive Post with hole to accept thru bolt) in two heights: Short & Long.
• - L1 (“L” Terminal with clearance hole to accept ¼”thru bolt)
• - L2 (“L” Terminal with clearance hole to accept 5/16 thru bolt)
• - L3 (“L” Terminal with clearance hole to accept 3/8” thru bolt, terminal height 1.2”)
• - L4 (“L” Terminal with clearance hole to accept 3/8” thru bolt, terminal height 1.5”)
• - C (Marine Combo terminal: Automotive Post and stud 5/16”)
• - S (Stud 3/8”)
• - F (Marine Flag terminal to accept 3/8” thru bolt)
  • F1 = .187" tab
  • F2 = .25" tab
  • F6 = Pressure Contact
• - B1 (Nut and Bolt Post)
• - B2 (Internal Threaded Post)
• - WL (Wire Lead)

*Please tell us what type of terminal you want to have on your battery if more than one option is listed. Put this information in the comments section of your order when you add the product to the cart or tell your sales person.

See Warranty information in Datasheets section above.