We are no longer offering this product.
The below information is presented for informational purposes only. You may also find similar items in the category.
- FEATURED PRODUCTS
- Solar Panels
- Solar Power Systems
- Productos Solares en Puerto Rico
- Charge Controllers
- Inverters
- Deep Cycle Batteries
- Solar Panel Mounts
- MORE PRODUCTS
- Cables & Wiring
- Enclosures, Electrical & Safety
- Inverter Power Panels & PreWired Systems
- Meters, Communications & Site Analysis
- Portable Power Systems
- Solar Water Pumps
- Voltage Converters
- Wind Turbines
- Books & Education
- * Clearance Sale *
- Hot Deals
- Open Box & Refurb Deals
Schneider Electric Conext Automatic Generator Start (AGS)
| Item code | Brand name | Model number |
| XANXWPLAUTOGENS | Schneider Electric | RNW865106001 |
Note: This Automatic Generator Start is compatible with XW+ and SW inverters.
Schneider Electric
Conext Automatic Generator Start (for XW+ and SW Series)
The Conext Automatic Generator Start (AGS) can automatically activate or stop a generator in response to changing power requirements. An excellent addition to an off-grid or backup power system, the AGS seamlessly connects to the Xanbus network and shares status information with all other devices on the network. It can monitor a set of system user-programmable parameters such as battery voltage, state of charge or grid power and can activate the generator in response to any changes. The AGS can also be configured remotely using the Conext System Control Panel (SCP) or Conext ComBox to engage a generator, and can assist an inverter/charger when output power demands are high.
Parts Included: 1 network terminator; 1 Cat5 cable; 1 mounting plate; 4 #6 screws
FEATURES:
ELECTRICAL /MECHANICAL CHARACTERISTICS:
| SPECIFICATIONS | |
| Nominal Voltage | 15 VDC | Max Operating Current at Nominal Voltage | 200 mA |
| Nominal 12/24 V thermostat input voltage/generator running B+ voltage | 12 Vdc / 24 Vdc* = On | Min. 12/24 V thermostat input voltage/generator running B+ voltage | 9.5 Vdc* |
| Max. 12/24 V thermostat input voltage/generator running B+ voltage | 30 Vdc* | Typical 12/24 V thermostat input current/generator running B+ voltage | 14.6 mA @ 12 V |
| IP rating / location | IP20/indoor only | Network | Protocol: Xanbus / Connectors: RJ45 |
| Safety | CSA 107.1, UL 458 4th Ed including Marine Supplement |
*Limited to Class 2 levels (100 VA)
