This item is a package made up of the following components. Please
call to speak to a sales representative to learn about other options
which may be available.
KiloVault® HAB™/Schneider XW Pro UL9540 Energy Storage System
Two robust brands in energy storage come together for a UL9540 certified Energy Storage System. This means that for states and jurisdictions that require this certification, rigorous thermal and electrical testing was performed. Evaluation of the UL listed components, together as a system, ensures they are integrated into a safe, high-performance system. This is a new safety standard for an Energy Storage System (ESS), where the equipment in the system is intended for connection to a local utility grid or standalone application. It designates key safety issues associated with an ESS including: safety of the battery component, fire detection and suppression, and potential environmental hazards.
A UL9540 ESS is comprised of a UL 1973-certified battery pack(s) and a UL 1741-certified inverter(s), in specific configurations. Combined system configurations for the KiloVault HAB, certified to UL9540 for residential applications, offer scalable solutions up to 15kWh of capacity. This kit is for 2:1 HAB to Inverter setup. The other residential certifications are for 1:1 and 2:2. Non-residential configurations include 3/4/5/6 HABs to 2 Inverters. Please speak to one of our sales representatives to adjust order based on your application.
Wall mounted all-in-one design with integrated lift handles
Integrated WiFi communications
Long cycle life (up to 6000 cycles)
Advanced High/Low temperature cycle performance
Intelligent LED & LCD display
Ventilation options provide improved performance in warmer climates, with solid plates to swap in for weather resistance
Large wiring access panel offers more space for making connections
Supports up to 14 HAB battery modules in parallel
Includes battery unit, mounting brackets and screws, communications cables, and box removal handles
10 Year Limited Warranty (Duration of Warranty is determined by Charging Profile - see table below and Warranty DOCUMENT for details)
XW Pro FEATURES:
UL 1741-certified inverter
Excellent load starting with high 30-minute and 60-second power
Improved battery management including support for Lithium-Ion technology
Superior balance of system integration with battery bank, charge controller, and generators, further simplifies installation
Supports DC coupled and AC coupled off-grid and grid-tie architectures
Intelligent functionality enables solar prioritization, load shifting, peak shaving, and assists small generators with heavy loads
5 Year Warranty with additional 5 years (10 year total warranty) if registered within 6 months of purchase.
Specifications HAB V4:
Specifications:
HAB V4
Rated Energy Capacity (Watt Hours)
7500 Wh
DC Voltage Nominal
51.2V
Nominal Amp-Hour Capacity
150 Ah
Optimal Charger/Inverter Settings
Bulk/Absorption: 56 V Float: NA (2-stage-no-float for charging cycle) Low Voltage Cut-Off: 48.2V Equalization: Disable. Do not use. (Battery will shut down into protection mode)
BMS firmware and hardware have been updated to allow V2 and V3 versions to be used with V4, if expansion is needed.
Monitoring
Wireless on-site detailed battery status monitoring
Communications
Integrated HAB to Inverter Modbus communications w RJ45 on both ends of cable using the RS-485 standard. Integrated HAB to HAB CAN bus communications w RJ45 on both ends of cable.
Self-Discharge Rate
≤3% per month *Only achieved if HAB is put to sleep by pressing down the power button for 10 seconds, otherwise standard shutdown can cause self-discharge to be as high as 9% per month
Maximum Configuration
14 batteries in parallel
Compatibility
All versions of HABs can communicate with each other, as long as they are updated with the latest firmware versions. (*V1 updates can not be done over internet so please call in to have special update kit sent). Conditions: When adding in parallel configuration to an older bank, the newest HAB version must be the leader. Communication cable is required.
Max Time Between Charges
6 months
Dimensions (L X W X H)
9.5 in x 22.5 in x 32 in
Weight
230 lbs
Ingress Rating
IP54 with vented plates IP55 with solid plates
Certifications
Unit Certified ETL to UL Standard 1973; UL1642; UN38.3; IEC62619; OSHA 18001/ISO45001; ISO 9001/1400
Specifications XW Pro:
Inverter AC Output:
XW Pro 6848
Output power (continuous) at 25 °C
6800 W
Overload 30 min / 60 sec at 25 °C
8500 W / 12000 W
Output power (continuous) at 40 °C
6000 W
Output frequency (selectable)
50 / 60 Hz
Output voltage
120/240 Vac
Input DC voltage range
40 to 60 V (48 V Nominal)
Maximum input DC current
180A
Charger DC Output:
XW Pro 6848
Maximum output charge current
140A
Output voltage range
40 - 64 V (48 V Nominal)
Charge control
Three stage, two stage, boost, custom
Charge temperature compensation
Battery temperature sensor included
Compatible battery types
Flooded (default), Gel, AGM, LiON
Battery bank range (scaled to PV array size)
440 - 10000 Ah
AC Input:
XW Pro 6848
AC 1 (Grid) Input Current - Selectable
3 - 60A
AC 2 (Generator) Input Current - Selectable
3 - 60A
AC Input Voltage (Nominal)
120/240 Vac
AC Input Frequency Range
52 - 68 Hz
General Specifications:
XW Pro 6848
Shipping Weight
169 lbs/ 77 kg
Shipping Dimensions
28.0 x 22.5 x 15.5 in
IP degree of protection
NEMA Type 1 Indoor
Operating air temperature range
-25 °C to 70 °C
Warranty
5 Year with additional 5 for total of 10 Years (if registered within 6 months of purchase)
Configuration
Split phase systems scalable up to 4 inverters; 3 phase systems scalable up to 6 inverters (*Firmware update, 3 Phase Breaker Kit, 2 XW Connection Kits required for 3 Phase operation)
Safety Certifications
UL1741, CSA 107.1
Interconnect
IEEE 1547, CSA 107.1, UL 1741-SA Rule 21, HECO Rule 14H, and PREPA compliant
Monitoring/Configuration
Conext Gateway or Insight Home/Facility (Required for configuration of XW Pro)
