Eaton Non-Fusible AC Disconnect, 60A, 240V, 3-Pole – DG322URB

Product Overview

The Eaton DG322URB is a 60 A, 240 V general-duty non-fusible safety switch in a NEMA 3R painted galvanized steel enclosure.

Use it when a three-pole outdoor disconnect is required and fuses are not needed in the switch.

Best For

• Outdoor 60 A AC disconnect points: Where a lockable non-fusible switch is specified for equipment isolation.
• Three-pole unfused outdoor isolation: Equipment protected upstream that needs a three-pole lockable switch.

Key Features & Specifications

What You May Also Need

Usually required

• Correctly sized conductors and overcurrent protection for the load (provide fuses for fusible models; provide upstream protection for non-fusible models).
• Lockout/tagout hardware as required by the job.

May be required

• Disconnects & Breakers: Matching Eaton Type BR breakers or related disconnects for the same project.
• Neutral kit when the application requires service-entrance use on a non-fusible switch (see Important Considerations).

Optional upgrades

• Enclosures, Electrical & Safety: Outdoor enclosures and related balance-of-system hardware.

Check current manufacturer documentation before combining components, especially batteries, inverters, communications equipment and system-control hardware.

Important Considerations

• WARNING! Switch is not approved for service entrance unless a neutral kit is installed.
• Provide overcurrent protection separately — this switch does not accept fuses.
• General-duty switches are for lighter-duty residential and light commercial use. Confirm suitability for the application against Eaton documentation.
• Professional installation required. Follow Eaton instructions and the NEC.