We are no longer offering this product.
The below information is presented for informational purposes only. You may also find similar items in the category.- FEATURED PRODUCTS
- Solar Panels
- Solar Power Systems
- Productos Solares en Puerto Rico
- Charge Controllers
- Inverters
- Deep Cycle Batteries
- Solar Panel Mounts
- MORE PRODUCTS
- Cables & Wiring
- Enclosures, Electrical & Safety
- Inverter Power Panels & PreWired Systems
- Meters, Communications & Site Analysis
- Portable Power Systems
- Solar Water Pumps
- Voltage Converters
- Wind Turbines
- Books & Education
- * Clearance Sale *
- Hot Deals
- Open Box & Refurb Deals
Solar Converters NEMA 3R, 12/24V, 10A
Item code | Brand name | Model number | Amps |
SORLS-2 | Solar Converters | LS-12/24-10E | 10A |
Model: LS-2 |
Solar Converters Inc.
Models: LS-12/24-10, LS-48-5 & LS-12/24-25
Solar Lighting Controllers
Application
A complete Solar Lighting Controller used to charge the battery during the day, turn on a light at night. This unit with its fused battery and integral LVD and day night sensor as well a remote control capability is a complete solar lighting control system.
Basic Operation
This Solar Light Controller charge controls the battery by day to a user selected voltage and then at night, turns on the light until the battery discharges to a user defined voltage. It includes a panel sensor to determine "nighttime", provision for a trigger signal and for external on/off control, as well as an adjustable internal timer for "Max." on time, and interface to a motion sensor to turn the light on if a person walks nearby.
Sequence of Operation - Day time:
- Unit charges with Maximum Power Point tracking and PWM Charge control to user defined battery voltage. The panel sensor keeps the light off during day hours.
Sequence of Operation - Night time:
- 1. The panel sensor turns on the light and sends trigger signal to external controller and external timer if used.
-
2. The light stays on until:
- 1. The battery low setpoint voltage is reached - no power left.
- 2. Turned off by the panel sensor - daylight sensed.
- 3. Turned off by external control - an external controller or simple on/off switch.
- 4. Turned off by internal timer set by resistor setting.
- 3. After light turns off from nighttime timer, motion sensor control will turn light back on when motion detected for adjustable time interval provided it is still night time.
Features
- Single unit 12V/24V systems. Also a 48V model.
- Optional temperature compensation (-4mv / deg C./cell) on battery voltage setpoints.
- Motion sensor interface to control light on/off by movement.
- User Adjustable battery charge setpoint and LVD setpoint.
- Remote trigger for remote on/off timing so the unit light can turn on and off several times during the night.
- 10 seconds time delay on panel voltage sensing - is it daylight or a passing car?
- Internal 10 amp MPPT / PWM Charge Controller.
- Adjustable 0 hr. to 16 hr. internal timer set by external resistor
Specifications
Model | Mount | Panel Voltage | Battery Voltage | Current |
LS-12/24-10 | Open Frame | |
||
LS-12/24-10E | Nema 3R Encl. | |
||
LS 48-5 | Nema 3R Encl. | |
|
|
LS 12/24-25 | Open Frame | |||
LS 12/24-25E | Nema 3R Encl. | |||
LSR 12-5 | Simplified | |||
LSR 6-5 | Simplified | |
User Controls
- Charge Voltage
- LVD Voltage
- Daytime sense level
- Max on time
- Light on/off override
LED Indicators
- Charging, Full indicate charging status
- Light On, LVD, SUN, Remote indicate light status
Mechanical Specifications
- Weight:
- 8 lb.
- Size:
- 10" X 8" X 4" NEMA 3R
- Available also open frame style to mount in user battery box. Size: 5" W X 4" L X 1.5" H with 4 mount holes
- Connections:
- Power: Euro-style Terminal Strip #10 AWG
- Signal: Euro-style Terminal Strip #14 AWG
- Operating Temperature:
- -40 to 50 deg. C
- Humidity:
- 0 - 90% non-condensing
Note: In the interest of continuous product improvement specifications subject to change without notice.
Order Model No:
- LS-2 in NEMA 3R box
- LS-1 open frame
PDF Documentation Downloads
Special Shipping Note:
All Solar Converter Products are behind in production. These items are usually shipped directly from the manufacturer in Canada. They cannot be shipped by any expedited methods such as UPS Blue or Red. They will generally be shipped via Canadian Express Mail which avoids import brokerage fees of $50-$60. Lead time on these products may be up to 4-6 weeks depending on their production. This is true of all Solar Converters products with the exception of the battery desulphator (item code SORBD-2) that we stock in our warehouse. If you want Solar Converters products to be shipped by normal Canadian Post, but would prefer to have the rest of your order to be shipped by a faster method, please write this information in your order's notes during checkout.