Shurflo 4048 Drive Assembly Replacement Kit

Shurflo
4048 Drive Assembly Replacement Kit (G)
94-801-02

The #94-801-02 is the Drive Assembly Replacement Kit (G) for the 4048 Water Pumps. Assembly: - Place the Valve Assembly (F) on top of the new Diaphragm assembly (G). Align grooves in the diaphragm with grooves in the valve assembly. - Place the upper housing (E) on top of the valve assembly (F) and drive assembly (G). Diaphragm should fit inside the housing with no pinching. - Align the "D" groove of the motor shaft witht eh "D" groove on the wobbler inside the drive assembley (G). Check to be sure the switch terminals face down toward the motor mounting plate. Push the pump head until it seals on the motor face. - Tighten the 4 inner housing screws (D), and 4 outer housing screws (C). - Attach the lead wires (A) onto the switch (B).