Grid-Tie 6.6kW Solar Power System with SMA Inverter

Grid-Tie 6.6kW Solar Power System with SMA Inverter
Grid-Tie 6.6kW Solar Power System with SMA Inverter
$7,324.60 List price $9,875.02

Estimate Shipping
Item code Brand name Model number
KITONGRID6.0SMA AltE Grid-Tie 6.6kW System


Use our Grid Tie Solar Calculator to see how big of a system you need:

Watch our video on "How much solar do I need for a 2000 square foot home?"

6.6kW Grid Tie System
With SMA Inverter

Would you like to reduce your electric bill? These grid tie solar power systems are a great place to start. So how much power are you currently using on a monthly basis? You'll need to look at your bill to find out. That will tell you how many kilowatt-hours (kWh) you are using each month. Then you simply plug that average monthly number into our Grid Tie Calculator, and off you go! Again, the video to the right will step you through this very simple process.

The map below gives you an average monthly usage of power that this system can produce for you. You'll see that different areas of the country have different amounts of peak sun hours. Take a look on map below and find where you live.

Grid Tie 6.6kW Grid Tie Insolation Map

NOTE:  The image of the solar panels above is representational.  The correct panel will always be listed in the table below.

6.6kW Grid Tie Kit Includes:
Part Number Item Description Quantity
TRI330TSMDD330B Trina 330 Watt Mono All Black Solar Panel 20
PVCMC4-MF-100FT 100' MC4 Connector Cable 2
GENMC4KEY Disconnect Tool for MC4 Connector Cables 1
SMASB6.0-US-41 SMA Sunny Boy 6000 Watt Grid Tie Inverter 1
SMAJMSF420 SMA JMS-F 420W Rapid Shutdown Unit 20
WILACE-2P Wiley ACE-2P Pass-Through Box 1
MIDMNSPD-600 Solar Surge Protection Device 600V 2
MIDMNSPD-300 Solar Surge Protection Device 300VDC/AC 1
SQUDU222RB Square D DU222RB 60A 240VAC Unfused Disconnect 1
SQUPK3GTA1 Square D Ground Kit PK3GTA1 1
BURBIBS43 Burndy Multiple Wire Terminal 2
TWOXR100204A IronRidge XR100 17' Rail, Clear 8
TWOXR100-BOSSM1 Bonded Splice Kit for XR-100 Rails 4
TWOXR100CAP End Cap for XR-100 Rails - Pair 4
TWOUFOCLMPBK IronRidge XR Universal Clamp, Black 44
TWOUFOSTP35MMB1 IronRidge XR Stopper Sleeve, 35MM, Black 8
TWOGDLUG XR Grounding Lug w/Hardware 2
TWOFLASHVUEM1 IronRidge FlashVue Flashing 36
TWOSQUAREBOLT Square Bonding Hardware 36
HLRDCCONDUCT NEC Label: DC Conductors May Be Energized 3
HLRWESHLBL17 NEC Label: Electric Shock Hazard 4
HLRCSCIRLBL NEC Label: Caution Solar Circuit, 5pk 1
HLR14TURNOFFPV NEC Label: Turn Off PV Before Working 3
HLRELECSHKDC17 NEC Label: Warning Elec Shock, DC Voltage 1
HLR14DUALPOWER NEC Label: Warning, Dual Power Source 1
HLRPVACDIS NEC Label: Photovoltaic AC Disconnect 3
HLRMPVSD NEC Label: Main PV System Disconnect 1
HLRPOWSRC17 NEC Label: Warning, Power Source Output 1
HLRDCDISCT NEC Label: Photovoltaic DC Disconnect 1
HLRMAXVOLT17 NEC Label: Maximum Voltage 1
HLRRAPID2017 NEC Label: Rapid Shutdown Switch 3

* To take a look at technical spec pages, installation manuals, warranty information, etc. click on each item in the chart to go to that Spec Page.

Components of this 6.6kW Grid Tie Solar Power System:

Listed below are the major components needed for a solar installation. Since each installation is unique, some parts/materials will need to be purchased separately to satisfy the needs of your specific project and local regulations.

1. Photovoltaic Modules (aka solar panels, solar electric panels)
The PV modules are the individual building blocks for providing power from the sun. They are typically made from silicon cells, glass, tedlar, and aluminum. Solar Panels can vary in type, size, shape, and color. The common nominal voltages for panels are 20V and 24V, in order to accomodate the voltage windows of grid tie inverters.

2. Racking/Mounting System for Solar Panels
The mounting system for the solar panels includes the hardware to permanently affix the array to either a roof, a pole, or the ground. These systems are typically made of aluminum and are customized to the mounting surface and the model of module used.  It is important to consider distance from roof for flush-type roof mount installations. Restricting airflow under the modules results in higher module operating temperatures that reduce power output. With pole mounts wind loading must be considered and proper civil works must be done with the foundation for the pole as well as the possible addition of supplementary wind supports for the array frame.

3. Combiner Box
A combiner box is an electrical box where series strings of solar panels are then spliced in parallel. This is also the place where the PV series string fuses or circuit breakers are located. This allows the installer to bring the separate strings together and combine them into one positive and one negative conductor, change wire types and leave the area of the modules in conduit. They are usually outside and weather rated, so they can be right next to the array.

4. DC and AC Disconnects
The DC and AC disconnects are manual switch units that are capable of cutting off power to and from the inverter. Some inverters have disconnects integrated into the unit with switches, others can have them integrated into a power panel assembly, and some inverters leave you on your own to provide suitable disconnecting means. The disconnects are used by service personnel or authorized persons (fire/police/electric workers) to disable power from a renewable energy system (in this case PV) so that there are no live electrical parts associated with the inverter, and that no current is going to the grid that could harm utility employees in the event that they are working in your area. Homeowners or authorized personnel can use the disconnects to de-energize a system for maintenance or service.

5. Grid Tie Inverter (String Inverter)
The grid tie inverter is the device that takes the energy that the photovoltaic system produces in DC current form and turns it to AC current that is then sent (sold) to the electric grid. These inverters typically have a voltage input range from 100 to 500 volts DC and they convert it into 120 volts AC, 240 volts AC, or 208 volts AC. These inverters are especially sophisticated devices that must conform to special regulations in order to tie into the utility. When the power goes out in your area, it is important to know that the grid tie inverter will not allow power to be sold back to the grid. This is done to prevent electric utility workers from being injured or killed by working on power lines they thought were de-energized. When the power goes out, your power will go out as well. A grid tie inverter will not resume normal operations until the utility grid has established standard conditions for 5 straight minutes within strict parameters.

See our video on the different grid tie inverters, and the benefits of the String Inverter:

This item is a package made up of the following components. Please call to speak to a sales representative to learn about other options which may be available.

Write a review

There are no reviews for this product.

Click here for BBB Business Review ASE NESEA Member
Paypal Visa MasterCard Amex Discover
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams