We are no longer offering this product.

The below information is presented for informational purposes only. You may also find similar items in the category.

Grid-Tie 10kW Solar Power System with Fronius Inverter

Grid-Tie 10kW Solar Power System with Fronius Inverter
Grid-Tie 10kW Solar Power System with Fronius Inverter

Components in these kits are ever changing - due to availability.  Please call in to discuss order before placing online so sales rep can adjust order based on availability.

Item code Brand name Model number
KITONGRID10FRN AltE Grid-Tie 10kW System


View this short video on how to use our Grid Tie Solar Calculator:

How much solar do I need for a 2000 square foot home?

10kW Grid Tie System
With Fronius Inverter

This 10kW Grid Tie Solar Power system for your home can help you reduce your electric bill partially - or even completely - depending on how much power you use. So how do you know how much power are you currently using on a monthly basis? You'll need to look at your bill to find out. That will tell you how many kilowatt-hours (kWh) you are using each month. Then you simply plug that average monthly number into our Grid Tie Calculator, and off you go! Again, the video to the right will step you through this very simple process.

For the Grid Tie System that we designed for you here, look on the map below and find where you live. This shows you an average monthly usage of power that this system can produce for you. You'll see that different areas of the country have different amounts of peak sun hours, so we had to factor that in.  Also be sure to check out our Solar Rebates page where you can look up your state - you can save as much as 50% or more, in combination with the Federal incentives, on your installed system!

Grid Tie 10.9kW Grid Tie Insolation Map

NOTE:  The image of the solar panels above is representational.  The correct panel will always be listed in the table below.

10kW Grid Tie Kit Includes:
Part Number Item Description Quantity
HEL360HSPE360B Heliene 360 Watt Mono Black Solar Panel 28
PVCMC4-MF-75FT 75' MC4 Connector Cable 1
PVCMC4-MF-50FT 50' MC4 Connector Cable 1
PVCMC4-MF-15FT 15' MC4 Connector Cable 1
PVCMC4-MF-8FT 8' MC4 Connector Cable 1
GENMC4KEY Disconnect Key MC4 Solar Panel Connector Cable 1
FRNPRIMO10.0LTE Fronius 10kW Grid Tie Inverter 1
TIGRSSTRSINGOUT Tigo RSS Transmitter Outdoor Kit 1
TIGTS4AF Tigo TS4-A-F Fire Safety Rapid Shutdown Unit 28
MIDMNSPD-600 Solar Surge Protection Device 600V 2
MIDMNSPD-300 Solar Surge Protection Device 300VDC/AC 1
SQUD222NRB Square D D222NRB 60A 240VAC Fusible Disconnect 2 Pole 1
SQUPK3GTA1 Square D Ground Kit PK3GTA1 1
BURBIBS43 Burndy Multiple Wire Terminal 2
ALR60AMP250VAC 60 Amp, 250 VAC/ 125 VDC Class R Fuse 2
F to 2M
M to 2F
TWOXR100132A IronRidge XR100 11' Rail, Clear 18
TWOXR100-BOSSM1 Bonded Splice Kit for XR-100 Rails 12
TWOXR100CAP End Cap for XR-100 Rails - Pair 6
TWOUFOCLMPBK IronRidge XR Universal Clamp, Black 62
TWOUFOSTP40MMB1 IronRidge XR Stopper Sleeve, 40MM, Black 12
TWOGDLUG XR Grounding Lug w/Hardware 3
TWOFLASHVUEM1 IronRidge FlashVue Flashing 48
TWOSQUAREBOLT Square Bonding Hardware 48
HLRDCCONDUCT NEC Label: DC Conductors May Be Energized 3
HLRWESHLBL17 NEC Label: Electric Shock Hazard 4
HLRPVPOWSRC Photovoltaic Power Source 5
HLR14TURNOFFPV NEC Label: Turn Off PV Before Working 3
HLRELECSHKDC17 NEC Label: Warning Elec Shock, DC Voltage 1
HLR14DUALPOWER NEC Label: Warning, Dual Power Source 1
HLRPVACDIS NEC Label: Photovoltaic AC Disconnect 3
HLRMPVSD NEC Label: Main PV System Disconnect 1
HLRPOWSRC17 NEC Label: Warning, Power Source Output 1
HLRDCDISCT NEC Label: Photovoltaic DC Disconnect 1
HLRMAXVOLT17 NEC Label: Maximum Voltage 1
HLRRAPID2017 NEC Label: Rapid Shutdown Switch 3

* To take a look at technical spec pages, installation manuals, warranty information, etc. click on each item in the chart to go to that Spec Page.

Components of this 10kW Grid Tie Solar Power System:

altE's Solar Power Systems include the major components needed for a solar installation. Since each installation is unique, some parts/materials will need to be purchased separately to satisfy the needs of your specific project and local regulations.

1. Photovoltaic Modules (aka solar panels, solar electric panels)
The PV modules are the individual building blocks for providing power from the sun. They are typically made from silicon cells, glass, tedlar, and aluminum. Solar Panels can vary in type, size, shape, and color. The common nominal voltages for panels are 20V and 24V, in order to accomodate the voltage windows of grid tie inverters.

2. Racking/Mounting System for Solar Panels
The mounting system for the solar panels includes the hardware to permanently affix the array to either a roof, a pole, or the ground. These systems are typically made of aluminum and are customized to the mounting surface and the model of module used.  It is important to consider distance from roof for flush-type roof mount installations. Restricting airflow under the modules results in higher module operating temperatures that reduce power output. With pole mounts wind loading must be considered and proper civil works must be done with the foundation for the pole as well as the possible addition of supplementary wind supports for the array frame.

3. Combiner Box
A combiner box is an electrical box where series strings of solar panels are then spliced in parallel. This is also the place where the PV series string fuses or circuit breakers are located. This allows the installer to bring the separate strings together and combine them into one positive and one negative conductor, change wire types and leave the area of the modules in conduit. They are usually outside and weather rated, so they can be right next to the array.

4. DC and AC Disconnects
The DC and AC disconnects are manual switch units that are capable of cutting off power to and from the inverter. Some inverters have disconnects integrated into the unit with switches, others can have them integrated into a power panel assembly, and some inverters leave you on your own to provide suitable disconnecting means. The disconnects are used by service personnel or authorized persons (fire/police/electric workers) to disable power from a renewable energy system (in this case PV) so that there are no live electrical parts associated with the inverter, and that no current is going to the grid that could harm utility employees in the event that they are working in your area. Homeowners or authorized personnel can use the disconnects to de-energize a system for maintenance or service.

5. Grid Tie Inverter (String Inverter)
The grid tie inverter is the device that takes the energy that the photovoltaic system produces in DC current form and turns it to AC current that is then sent (sold) to the electric grid. These inverters typically have a voltage input range from 100 to 500 volts DC and they convert it into 120 volts AC, 240 volts AC, or 208 volts AC. These inverters are especially sophisticated devices that must conform to special regulations in order to tie into the utility. When the power goes out in your area, it is important to know that the grid tie inverter will not allow power to be sold back to the grid. This is done to prevent electric utility workers from being injured or killed by working on power lines they thought were de-energized. When the power goes out, your power will go out as well. A grid tie inverter will not resume normal operations until the utility grid has established standard conditions for 5 straight minutes within strict parameters.

See our video on the different grid tie inverters, and the benefits of the String Inverter :

This item is a package made up of the following components. Please call to speak to a sales representative to learn about other options which may be available.

Click here for BBB Business Review ASE NESEA Member
Paypal Visa MasterCard Amex Discover
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams