This item is a package made up of the following components. Please
call to speak to a sales representative to learn about other options
which may be available.
KiloVault® HAB™/Sol-Ark 12K Inverter UL9540 Energy Storage System
Two robust brands in energy storage come together for a UL9540 certified Energy Storage System. This means that for states and jurisdictions that require this certification, rigorous thermal and electrical testing was performed. Evaluation of the UL listed components, together as a system, ensures they are integrated into a safe, high-performance system. This is a new safety standard for an Energy Storage System (ESS), where the equipment in the system is intended for connection to a local utility grid or standalone application. It designates key safety issues associated with an ESS including: safety of the battery component, fire detection and suppression, and potential environmental hazards.
A UL9540 ESS is comprised of a UL 1973-certified battery pack(s) and a UL 1741-certified inverter(s), in specific configurations. Combined system configurations for the KiloVault HAB, certified to UL9540 for residential applications, offer scalable solutions up to 15kWh of capacity. This kit is for 2:1 HAB to Inverter setup. The other residential certifications are for 1:1 and 2:2. Non-residential configurations include 3/4/5/6 HABs to 2 Inverters. Please speak to one of our sales representatives to adjust order based on your application.
Wall mounted all-in-one design with integrated lift handles
Integrated WiFi communications
Long cycle life (up to 6000 cycles)
Advanced High/Low temperature cycle performance
Intelligent LED & LCD display
Ventilation options provide improved performance in warmer climates, with solid plates to swap in for weather resistance
Large wiring access panel offers more space for making connections
Supports up to 14 HAB battery modules in parallel
Includes battery unit, mounting brackets and screws, communications cables, and box removal handles
10 Year Limited Warranty (Duration of Warranty is determined by Charging Profile - see table below and Warranty DOCUMENT for details)
SOL-ARK FEATURES:
UL 1741-certified inverter
Easy and fast to install - no external components (ie. fuses, breakers, combiner box) - all integrated in one unit
Indoor/Outdoor installations
Works with the widest variety of 48V battery chemistries - from lead acid to lithium
Backup power (even use the Grid as backup!) and support for time-of-use optimization
Completely pre-wired system - Sol-Ark inverter and charge controller included
Wifi integrated for easy monitoring of system performance
Integrated DC Disconnect, Auto Gen Start, Critical Loads panel
Highly efficient - both on-grid and off-grid
Generator support
Field-upgradeable software with remote support
Fully NEC compliant (N. America) with rapid shutdown
10 Year Warranty
Specifications HAB V4:
Specifications:
HAB V4
Rated Energy Capacity (Watt Hours)
7500 Wh
DC Voltage Nominal
51.2V
Nominal Amp-Hour Capacity
150 Ah
Optimal Charger/Inverter Settings
Bulk/Absorption: 56 V Float: NA (2-stage-no-float for charging cycle) Low Voltage Cut-Off: 48.2V Equalization: Disable. Do not use. (Battery will shut down into protection mode)
BMS firmware and hardware have been updated to allow V2 and V3 versions to be used with V4, if expansion is needed.
Monitoring
Wireless on-site detailed battery status monitoring
Communications
Integrated HAB to Inverter Modbus communications w RJ45 on both ends of cable using the RS-485 standard. Integrated HAB to HAB CAN bus communications w RJ45 on both ends of cable.
Self-Discharge Rate
≤3% per month *Only achieved if HAB is put to sleep by pressing down the power button for 10 seconds, otherwise standard shutdown can cause self-discharge to be as high as 9% per month
Maximum Configuration
14 batteries in parallel
Compatibility
All versions of HABs can communicate with each other, as long as they are updated with the latest firmware versions. (*V1 updates can not be done over internet so please call in to have special update kit sent). Conditions: When adding in parallel configuration to an older bank, the newest HAB version must be the leader. Communication cable is required.
Max Time Between Charges
6 months
Dimensions (L X W X H)
9.5 in x 22.5 in x 32 in
Weight
230 lbs
Ingress Rating
IP54 with vented plates IP55 with solid plates
Certifications
Unit Certified ETL to UL Standard 1973; UL1642; UN38.3; IEC62619; OSHA 18001/ISO45001; ISO 9001/1400
Specifications SOL-ark:
12K
Solar PV Continuous Power
12 kW*
Inverter AC Continuous Power (On Grid)
9kW*
Inverter DC Continuous Power (Off Grid)
9kW
Off Grid Inverter AC Peak Surge Power
16kW (10s)
Continuous AC Power w/Grid or Generator
12kW
System Idle Power
60W
Continuous Battery Charging Output
185A
Battery Capacity
50 - 9900Ah
PV to Battery Efficiency @ 65%
97.5%
AC to Battery Efficiency @ 65%
96%
Battery to AC Efficiency @ 65%
95%
On Grid PV to AC Efficiency @ CEC
96%
Grid Failure UPS Transfer Time
4 ms
Preferred Application
Grid Tie + Storage, Off Grid
Parallel Stacking
Yes - up to 8 (240V)
3 Phase Capability
Yes
EMP Hardened Option Available
Yes
Enclosure
NEMA 3R
Weight and Dims (H x W X D)
78 lbs 30.0" x 18.3" x 10"
Warranty
10 Year
*IMPORTANT NOTE: SOL-ARK 12K is a combined output - (split between DC Battery and AC Loads/Grid). The max power to the grid or AC loads is 9kW - in conjunction with simultaneously charging the batteries. So for example - if 9kW is going to the grid, an additional 3kW of power can be used to charge the batteries.
