We are no longer offering this product.
The below information is presented for informational purposes only. You may also find similar items in the category.- FEATURED PRODUCTS
- Solar Panels
- Solar Power Systems
- Productos Solares en Puerto Rico
- Charge Controllers
- Inverters
- Deep Cycle Batteries
- Solar Panel Mounts
- MORE PRODUCTS
- Cables & Wiring
- Enclosures, Electrical & Safety
- Heat Pump Water Heaters
- Inverter Power Panels & PreWired Systems
- Meters, Communications & Site Analysis
- Portable Power Systems
- Solar Water Pumps
- Voltage Converters
- Wind Turbines
- Books & Education
- * Clearance Sale *
- Hot Deals
- Open Box & Refurb Deals
Grid-Tied 6.5kW Residential Home Solar System with Battery Backup
Item code | Brand name | Model number |
KITGRIDBACK-6 | AltE | Grid-Tied w Backup 6.5kW |
Grid Tie with Battery Back-Up
6.5 kW Home Solar System
The performance of each home solar system will vary greatly based on the location where it is installed. If you need help sizing a Solar Grid Tie system for your home, check out our On Grid System Calculator
Each of these home solar systems are designed to provide you with the main components you will need to equip your home with a grid-tied Solar system that includes a back up battery bank. altE's Home Solar Systems include the major components needed for a solar installation. Since each installation is unique, some parts/materials will need to be purchased separately to satisfy the needs of your specific project and local regulations. If you experience frequent power outages but want to keep your connection to the utility grid, one of these systems might be just the thing for you! From premium modules and racking systems, to efficient inverters and durable batteries, these packages include high quality, safe components for your solar installation. Also be sure to check out our Solar Rebates
page where you can look up your state - you can save as much as 50% or
more, in combination with the Federal incentives, on your installed
system!
Grid-Tied 6.5kW Home Solar System with Battery Back Up Includes: | ||
Part Number | Item Description | Quantity |
HEL360HSPE360B | Heliene 360 Watt Mono All Black Solar Panel | 18 |
PVCMC4-MF-100FT | 100' MC4 Connector Cable #10 AWG | 2 |
PVCMC4-MF-50FT | 50' MC4 Connector Cable #10 AWG |
2 |
PVCMC4-MF-30FT | 30' MC4 Connector Cable #10 AWG |
2 |
GENMC4KEY | Disconnect Key for Solar Panel Connector Cables | 1 |
TWOXR100132A | IronRidge XR100 Rail, 11 Feet, Mill Finish |
12 |
TWO29-4000-077 | XR Rail Cable Clips, Bag of 20 | 2 |
TWOXR100CAP | IronRidge End Cap for XR-100 Rails | 6 |
TWOXR100-BOSSM1 | IronRidge Splice Kit for XR-100 Rails | 6 |
TWOFLASHVUEM1 | Ironridge FlashVue Flashing | 36 |
TWOTBOLT | Ironridge T-Bolt Bonding Hardware | 36 |
TWOUFOSTP40MMB1 | Ironridge UFO Stopper End Clamp Kit | 12 |
TWOUFOCLMPBK | Ironridge UFO Mid Clamp , Black | 44 |
TWOGDLUG | IronRidge Grounding Lug | 3 |
MIDMNPV12-250 | Midnite Solar MNPV12-250 Combiner Box | 1 |
GENSR-2HOLES-LN | 1/2" Strain Relief 2 Round Holes/Locknut | 6 |
GENSR-1HOLE-LN | 1/2 Inch Single Hole Strain Relief with Locknut | 1 |
MIDMNEPV20-300 | Midnite Solar 20 Amp 300VDC Din Rail Mount Breaker | 6 |
MIDMNSPD-300 | Midnite Solar Surge Protection Device - 300V | 2 |
MIDCLASSIC150 | Midnite Classic 150 MPPT Solar Charge Controller | 2 |
XANXW6848PRO | Schneider Electric XW Pro 6848 Inverter/Chg | 1 |
XANXWPLUSPDP | Schneider Electric XW+ Power Distribution Panel | 1 |
SCNINSIGHTHOME | Schneider Electric Insight Home Gateway Device | 1 |
MIDMNEDC-80 | 80Amp 150VDC Panel Mount Breaker | 2 |
OUTPNL60-300DC | 60Amp 300VDC Panel Mount Breaker | 2 |
MIDMNBRKADAPTER | Midnite Solar 3/4" to 1" wide Breaker Adapter | 4 |
SQUDU222RB | Square D DU222RB 60A 240VAC Unfused Disconnect, 2 pole | 1 |
SQUPK3GTA1 | Square D Ground Kit pk3gta1 | 1 |
KLV2100PLC | KiloVault 2100Wh 12V Advanced AGM Battery | 16 |
ALTBC-2/0-120RB | Battery to Inverter Cables, 2/0, 10Ft, Pair | 1 |
ALTBC-2/0-24B | Battery Interconnect Cable, 2/0 AWG 24", Black | 3 |
ALTBC-2/0-24R | Battery Interconnect Cable, 2/0 AWG 24", Red | 3 |
HLRELECSHKDC17 | Electric Shock Hazard Label | 1 |
HLRPVPOWSRC | Photovoltaic Power Source | 5 |
HLRMAXVOLT17 | Max Voltage Max Current Label | 1 |
HLRDCDISCT | Photovoltaic DC Disconnect Label | 1 |
HLRWDPSLBL | Warning - Dual Power Source Label | 1 |
HLRACRATING | Inverter AC Rating Label | 1 |
HLRRAPID2017 | Rapid Shutdown Switch Label | 1 |
HLRRAPID | PV System Equipped with Rapid Shutdown Label | 1 |
HLRACDISCT | Photovoltaic AC Disconnect Label | 1 |
HLRPOWSRC17 | Warning: Power Source Do Not Relocate | 1 |
HLR14DUALPOWER | Warning: Dual Power Source Label | 2 |
HLR14TURNOFFPV | Turn Off PV AC Disconnect Label | 3 |
HLRPVACDIS17 | PV System AC Disconnect Label | 3 |
HLRWESHLBL17 | Warning: Electrical Shock Hazard Label | 4 |
HLRMPVSD | Main PV System Disconnect Label | 2 |
Schneider Electric
Conext XW Pro 6848 Inverter/Charger
The Conext XW Pro is the perfect solution for solar and storage requirements that comply with evolving grid codes. It is also Rule 21 compliant with a planned development roadmap to meet other utility requirements in North America. Able to be integrated with the Conext Gateway and Conext Insight 2, it offers simplifed system configuration and powerful remote monitoring & control. The XW Pro works intelligently with solar charge controllers and other PV inverters in AC-coupled configurations.
Features:
- Intelligent functionality enables solar prioritization, load shifting, peak shaving, and assists small generators with heavy loads
- Excellent load starting with high 30-minute and 5-second power
- 120/240V split phase systems, scalable up to 4 inverters (34 kW)
- Improved battery management including support for Lithium-Ion technology
- 10 Year Warranty
Solar Charge Controller
The Midnite Solar Classic lines of MPPT charge controllers will substantially increase the flexibility, features and range currently found on MPPT controllers. The MidNite Classic charge controller is unique in its ability to be used for a great variety of DC input sources. The Classic is designed to regulate DC input from PV, and Approved Hydro and Wind turbines. The Classic 150, 200 and 250 are designed to work with 12, 24, 36, 48, and 72 volt battery banks. The Classic standard models are the only MPPT controllers with built-in Arc Fault Detection, making them the safest controllers available.
Features of Midnite Classic 200 MPPT Charge Controller include:
- 79 Amp 200 Voltage
- 12-72V battery charging standard
- Built in DC-GFP and Arc Fault Detector
- Battery temperature sensor is included
- Solar, wind and hydro MPPT modes
- Remote and local displays possible
Batteries
The KiloVault 2100 PLC is a pure lead carbon sealed AGM deep cycle solar battery, for cycling applications. KiloVault 2100 PLC is a cost-effective, maintenance-free battery that offers superior performance in Partial State Of Charge (PSoC) applications, combining pure lead and advanced carbon technology for extended battery life and rapid charging. The batteries are designed for residential or light commercial off-grid, backup, or self-consumption applications.
This home solar system includes (16) 12V, 180Ah batteries, which will be wired together in 4 strings for a 48V, 720Ah, or 33.6kWh battery bank. Deep cycle batteries should not be discharged lower than 50%, so a battery bank of this size will provide approximately 8400 Watt hours (Wh) of energy per day, for two days when fully charged. This is a rough estimate of capacity, actual capacity can change based on temperature, state of charge and the condition of the batteries. Additional batteries can be added to this system to increase the capacity of the battery bank.
**SEE DOCUMENTS TAB ABOVE FOR A WIRING SCHEMATIC OF THIS SYSTEM (For Reference ONLY - please use Product Installation Manuals by manufacturer)
Our grid tie with battery back up home solar systems include the basics that you'll need for your solar installation. In this table, we've listed a few more items that you may want to include with your package order. If you are interested in auto generator starts, mounting standoffs, or additional batteries and cables, this is the place to find them.
Recommended Package Add-Ons | |
Part Number | Item Description |
KLV2100PLC | KiloVault 2100Wh 12V Advanced AGM Battery |
OUTIBR-2-48-175 | 2 Shelf Integrated Battery Rack |
EFEELITE | Efergy Energy Monitor for Home Energy Usage |
This item is a package made up of the following components. Please call to speak to a sales representative to learn about other options which may be available.
- 18 x Heliene 360 Watt Black Mono Solar Panel
- 2 x Staubli 100' MC4 Connector Extension #10 AWG
- 2 x Staubli 50' MC4 Connector Extension #10 AWG
- 2 x Staubli 30' Mc4 Connector Extension #10 Awg
- 1 x Disconnect Key for Staubli MC4 Connectors
- 12 x Ironridge XR-100 Rail, 11 Foot Section, Clear
- 6 x Ironridge End Cap for XR-100 Rails - Pair (Left/Right)
- 6 x IronRidge XR-100 BOSS Bonded Structural Splice
- 2 x Ironridge XR Rail Wire Clips (Bag of 20)
- 44 x IronRidge Universal Fastening Object (UFO), Black , Each
- 12 x IronRidge XR Stopper Sleeve, 40MM, Black, EACH
- 3 x IronRidge XR Grounding Lug w Hardware, Each
- 36 x Clear (Mill) IronRidge FlashVue
- 36 x Bonding Hardware, T-Bolt, for FlashFoot 2 and L Foot, Each
- 2 x Midnite Solar Classic 200 MPPT Charge Controller, 200V 79A
- 1 x Schneider Electric Conext XW Pro 6848 Inverter/Charger
- 1 x Schneider Electric XW Power Distribution Panel
- 1 x Schneider Electric Insight Home Gateway Device
- 2 x Outback Power 60A 300 Vdc Panel Mount Breaker
- 2 x Midnite Solar 80Amp 150VDC Panel Mount Breaker
- 4 x Midnite Solar 3/4" to 1" wide Breaker Adapter
- 1 x Square D DU222RB 60A 240VAC Unfused Disconnect, 2 pole
- 1 x Square D Ground Kit pk3gta1
- 16 x KiloVault 2100 PLC 2100Wh 180 Ah 12V Advanced AGM Battery
- 1 x Battery to Inverter Cables, 2/0 AWG 10Ft (120"), Red/Black Pair
- 3 x Battery Interconnect Cable, 2/0 AWG 24", Black
- 3 x Battery Interconnect Cable, 2/0 AWG 24", Red
- 1 x Midnite Solar MNPV12-250 Combiner Box
- 1 x 1/2 Inch Single Hole Strain Relief with Lock Nut
- 6 x 1/2 Inch 2 Hole Strain Relief with Lock Nut
- 6 x Midnite Solar 20 Amp 300VDC Din Rail Mount Breaker
- 2 x Midnite Solar Surge Protection Device 300VDC and 120/240 VAC
- 1 x NEC 2017 Compliant Label: Warning - Electrical Shock Hazard - DC Voltage
- 3 x NEC 2014 Compliant Label: Turn off Photovoltaic AC Disconnect
- 3 x NEC 2017 Compliant Label: PV System AC Disconnect Label
- 4 x NEC 2017 Compliant Label: Warning - Electrical Shock Hazard
- 2 x NEC 2011 Compliant Label: Main PV System Disconnect Label
- 5 x NEC 2020 Compliant Label: Photovoltaic Power Source
- 1 x NEC 2011 Compliant Label: Photovoltaic DC Disconnect Label
- 2 x NEC 2014 Compliant Label: Warning -Dual Power Source
- 1 x NEC 2011 Compliant Label: Inverter AC Rating Label
- 1 x NEC 2017 Compliant Label: Maximum Voltage Label
- 1 x NEC 2011 Compliant Label: Photovoltaic AC Disconnect Label
- 1 x NEC 2017 Compliant Label: Rapid Shutdown Switch
- 1 x NEC 2014 Compliant Label: Photovoltaic System Equipped With Rapid Shutdown
- 1 x NEC 2017 Compliant Label: Warning - Power Source - Do Not Relocate