- FEATURED PRODUCTS
- Solar Panels
- Solar Power Systems
- Charge Controllers
- Deep Cycle Batteries
- MORE PRODUCTS
- Cables & Wiring
- Enclosures, Electrical & Safety
- Heat Pump Water Heaters
- Inverter Power Panels
- Lighting & Fans
- Meters, Communications & Site Analysis
- Portable Power Systems
- Refrigerators & Freezers
- Solar Panel Mounts
- Solar Water Pumps
- Voltage Converters
- Wind Turbines
- * Clearance Sale *
SolarWorld 295 Watt Solar Panel, Sunmodule SW295 Mono V4.0 Frame - 5 Busbar
|Item code||Brand name||Model number||Volts||Watts||Cell Tech||Connector Type|
|SOW295SW295M4.0||SolarWorld||SW PL 295 MONO SV 5BB||20V||295W||Monocrystalline||H4|
NEW Dual Warranty Protection on SolarWorld Solar Panels! For 3-20kW residential installations installed 1/1/2017 or after. See DOCUMENTS tab for Details.
Call us for special discounts on pallet pricing!
1-800-320-9514 for more information.
See our video on "3 Cool Things about SolarWorld Solar Panels!"
Plus, learn about the differences beteween poly and mono solar panels here:
Sunmodule Plus SW 295 Mono / Version 4.0 (33 mm frame)
295 Watt Monocrystalline Solar Panel - 5 busbar
The new SolarWorld Sunmodule SW 295 Watt (33 mm frame) solar panels now come with 5 busbars (vs. 3). See our BLOG on why this means more power for you!
Did you know SolarWorld solar panels are plus-sorted by testing each solar panel as they come off the manufacturing line? They are rounded down to the nearest 5 watt increment. So a 295W panel could be anywhere from 295W to 299.9 watts. This ensures you are getting the highest system efficiency and saves you the time the time-consuming chore of sorting the solar panels at the job site.
The patented box channel frame design provides extraordinary stiffness in bending and torsion. The laminate with 4mm glass is set deep in the frame channel and secured with precision applied adhesive. The frame is assembled by press fit to maximize strength and longevity. The result is an extremely robust package that can be mounted in any orientation and can withstand static loads of up to 113 psf on a standard two-rail mounting system.
SolarWorld provides a 10-year Limited Product Warranty and 25-year Linear Service Warranty*.
*See warranty statement in the 'Documents' section above for details.
Check out our blog "How Do I Read the Solar Panel Specifications?"
- Silicone sealant
- Tempered glass
- EVA embedding
- Solar cell
- Back sheet
- High-strength frame
|Rated power||Pr||SW295 (v4)|
|Peak power voltage||Vmpp||31.5V|
|Peak power current||Impp||9.45A|
|0pen circuit voltage||Voc||40.0V|
|Short circuit current||Isc||10.10A|
|Max System Voltage||1000V|
|Cell Type||Mono 5 busbar|
* Max Reverse Current of this module is 25A. Reverse current is used for calculations and sizing of fuses and breakers. This is subjective - as this can be calculated based on 80% of the max, or 90% of the max etc. Therefore depending on how the fuses/breakers are sized, this module can handle a maximum of 25A of reverse current.
**Frame compatible with both "Top-Down" and "Bottom" mounting methods. Grounding locations - 4 locations along the length of the module in the extended flange.
Due to continuous research and product improvement the specifications in this Product Information Sheet are subject to change without notice. Specifications can vary slightly. For installation and operation instructions, see the applicable manuals. No rights can be derived from this Product Information Sheet and SolarWorld AG assumes no liability whatsoever connected to or resulting from the use of any information contained herein.
To see why SolarWorld claims one of the lowest panel defect rates in the industry, and why their systems have been operating flawlessly in the field for 30 years, click on video below.
There are no reviews for this product.