SHOP ALL PRODUCTS
- FEATURED PRODUCTS
- Solar Panels
- Solar Power Systems
- Productos Solares en Puerto Rico
- Charge Controllers
- Inverters
- Deep Cycle Batteries
- Solar Panel Mounts
- MORE PRODUCTS
- Cables & Wiring
- Enclosures, Electrical & Safety
- Heat Pump Water Heaters
- Inverter Power Panels & PreWired Systems
- Meters, Communications & Site Analysis
- Portable Power Systems
- Solar Water Pumps
- Voltage Converters
- Wind Turbines
- Books & Educational Videos
- * Clearance Sale *
- Hot Deals
- Open Box & Refurb Deals
Tamarack Solar 2 Module Top of Pole Mount
Tamarack Solar 3 Module Top of Pole Mount
Tamarack Solar 4 Module Top of Pole Mount
Tamarack Solar 6 Module Top of Pole Mount
Model:
TTP-A-2 (2 modules)
TTP-A-3 (3 modules)
TTP-A-4 (4 modules)
TTP-A-6 (6 modules)
Select model:| Item code | Brand name | Model number |
| TAM-TTPA2 | Tamarack Solar | TTP-A-2 |
| Item code | Brand name | Model number |
| TAM-TTPA3 | Tamarack Solar | TTP-A-3 |
| Item code | Brand name | Model number |
| TAM-TTPA4 | Tamarack Solar | TTP-A-4 |
| Item code | Brand name | Model number |
| TAM-TTPA6 | Tamarack Solar | TTP-A-6 |
Tamarack TTP-A Top-of-Pole Solar Panel Mounts
Updated in 2023! Tamarack's TTP-A Top-of-Pole Solar Panel Mounts (formerly TTP) have been re-engineered for increased stability, higher wind/snow load tolerance, and easier installation.
Tamarack's TTP-A solar panel mounting system offers a straighforward top-of-pole (TOP) mounting solution for small-scale solar PV needs. With its user-adjustable angle settings, it can support installations in a wide range of locations.
What Should I Know About Tamarack TTP-A Pole Mounting Systems?
Several important things to keep in mind when considering this top-of-pole PV mounting solution:
- TTP-A Mounts can only accommodate solar panels with widths topping out at 41.5" or 43" (see table below), like our Rich Solar Panels
- The 4"/6" schedule-40 or schedule-80 steel pipe for the vertical pole is not included, but can easily be sourced locally
- The two 2" horizontal steel pipes (labeled as "Support Pipe" in the diagram") are not included, but can easily be sourced locally
- Pipe Kits are available to order separately based on the length of the modules being used (see table below)
Benefits of Tamarack TTP-A Pole Mounting System
- Engineered for up to 160 mph wind loads and 200 psf snow loads
- Heavy-duty steel structure and Tamarack 3.1 aluminum module mounting rails
- 10° to 60° tilt angle
- Fits any module up to 41.5" or 43" wide with frames 30-40mm thick
- No complex sizing documents or need to send module data sheets when ordering
- Ships in multiple boxes - can go UPS!
- Mounts on user-supplied 4" or 6" schedule-40 or schedule-80 steel pipe (see table below)
- Requires 2 sections of schedule-40 pipe sourced locally
| Model | TTP-A-2 | TTP-A-3 | TTP-A-4 | TTP-A-6 |
| Max Module Width | 41.5" | 43" | 41.5" | 43" |
| Vertical Pole Diameter | 4" | 6" | ||
| Pipe Kit needed for Modules up to this Length | PIPE-KIT-SD-5 (Two 5-ft 2-inch pipes for modules with length up to 98-inches) | PIPE-KIT-SD-10 (Four 5-ft 2-inch Sch 40 pipes for modules with length up to 78-inches) PIPE-KIT-SD-12 (Four 6-ft 2-inch Sch 40 pipes for modules with length up to 98-inches) PIPE-KIT-HD-10 (Four 5-ft 2-inch Sch 80 pipes for modules with length up to 78-inches) PIPE-KIT-SD-12 (Four 6-ft 2-inch Sch 80 pipes for modules with length up to 98-inches) |
||
