- FEATURED PRODUCTS
- Solar Panels
- Solar Power Systems
- Battery Backup Solar Power Systems
- Productos Solares en Puerto Rico
- Charge Controllers
- Deep Cycle Batteries
- MORE PRODUCTS
- Cables & Wiring
- Enclosures, Electrical & Safety
- Heat Pump Water Heaters
- Inverter Power Panels & PreWired Systems
- Meters, Communications & Site Analysis
- Portable Power Systems
- Solar Panel Mounts
- Solar Water Pumps
- Voltage Converters
- Wind Turbines
- Books & Educational Videos
- * Clearance Sale *
S-5! T Clamp
|Item code||Brand name||Model number|
for Standing Seam Roofs
S-5! clamps can be used to attach mounting feet or rails to a standing seam roof. The S-5! clamps attach to the panel seam by the tightening of two "bullet-nosed" stainless steel setscrews against the seam material. (This is usually done with an industrial grade screwgun.) The setscrews compress the seam material against the opposite wall of the clamp. They will "dimple" the seam material, but will not penetrate it, leaving the roof warranty intact. Threaded holes in the clamp (and stainless hardware provided) enable the easy attachment of various ancillary items to the clamps.
The S-5-T clamp is specially developed to fit profiles having a “T” shaped seam configuration. It will also work on architectural “single-fold,” or “horizontal seam” profiles having a horizontal projection of 5/8” or less. Its two-piece design allows it to be easily installed anywhere along the length of the panel seam. The S-5-T is perfect for use with S-5!® ColorGard® snow retention systems and other heavy-duty applications.
Installation is as simple as placing the clamp on the seam, positioning the insert piece, and tightening the patented round-point setscrews to the specified tension. Then, affix ancillary items using the bolt provided with the product.
The S-5-T clamps have been tested for load-to-failure results on a variety of “T” shaped standing seam roof profiles. The independent lab test data found at www.S-5.com can be used for load-critical designs and applications. S-5!® holding strength is unmatched in the industry.
Each S-5-T Clamp includes:
- Structural aluminum attachment clamp
- Required hardware (stainless steel)
- A bit tip for tightening setscrews using an electric screwgun
For more information on how S-5! Mini clamps and PV-Kits are used for solar installations, check out this video from S-5!.
There are no reviews for this product.