S-5! B Clamp, Brass

S-5!
S-5-B Clamp
for Standing Seam Copper Roofs

S-5! clamps can be used to attach mounting feet or rails to a standing seam roof. The S-5! clamps attach to the panel seam by the tightening of two "bullet-nosed" stainless steel setscrews against the seam material. (This is usually done with an industrial grade screwgun.) The setscrews compress the seam material against the opposite wall of the clamp. They will "dimple" the seam material, but will not penetrate it, leaving the roof warranty intact. Threaded holes in the clamp (and stainless hardware provided) enable the easy attachment of various ancillary items to the clamps.

Architects and roof designers choose copper roofing for its timeless elegance and durability. The S-5-B (“B” for “Brass”) allows architects to maintain that theme with all equipment and accessories that must be mounted to the roof with permanence and durability consistent with the roof itself. This clamp is specifically designed for double-folded copper standing seam paneling.

Installation is as simple as setting the specially patented round-point setscrews into the clamp, placing the clamp on the seam, and tightening them to the specified tension. Then, affix ancillary items using the bolt provided with the product.

The S-5-B clamp has been tested for load-to-failure results on cold-rolled standing seam copper. The independent lab test data found at www.S-5.com can be used for load-critical designs and applications. S-5!® holding strength is unmatched in the industry.

Each S-5-B Clamp includes:

• Structural brass attachment clamp
• Required hardware (stainless steel)
• A bit tip for tightening setscrews using an electric screwgun

For more information on how S-5! Mini clamps and PV-Kits are used for solar installations, check out this video from S-5!.