We are no longer offering this product.
The below information is presented for informational purposes only. You may also find similar items in the category.- FEATURED PRODUCTS
- Solar Panels
- Solar Power Systems
- Productos Solares en Puerto Rico
- Charge Controllers
- Inverters
- Deep Cycle Batteries
- Solar Panel Mounts
- MORE PRODUCTS
- Cables & Wiring
- Enclosures, Electrical & Safety
- Inverter Power Panels & PreWired Systems
- Meters, Communications & Site Analysis
- Portable Power Systems
- Solar Water Pumps
- Voltage Converters
- Wind Turbines
- Books & Education
- * Clearance Sale *
- Hot Deals
- Open Box & Refurb Deals
Residential Master Flash 1/4" - 3" Black EPDM
Item code | Model number |
AZTRS051BA | RS051BA |
Aztec Washer Company
Residential Master Flash
RS051BA
Aztec's flexible design meets virtually all roofing needs. Sleeve flexibility accommodates vibration and pipe movement caused by expansion/contraction. The soft aluminum base easily conforms to roof panels. Master Flash® was used to create a new engineering standard for profiled roofing by the International Association of Plumbing and mechanical Officials(for the uniform Plumbing Code) and remains the only product listed. These products are also listed for use with Type B vents. The addition of fire retarding agents milled directly into the rubber compound created a self extinguishing feature which enables it to be used with Type B vents. Listed with IAPMO certification No. 3121.
Features
- Weather Protection: Black EPDM rubber with a "C20" ASTM assures conformance to the most stringent ozone/weathering specifications avaialable. This allows the rubber a 20 year life.
- Easy On Site Customization: The pull-tab design and easy smooth tear grooving in intended to eliminate razor knives and allow for a clean, circular hole
- Base Flexibility: The soft aluminum base with built-in 20° pitch allows adaptability to almost any roof pitch including 45 °
Dimensions: | |
A - Top Opening Diameter | Closed |
B - Pull to Suit Pipe Size | 1/4" - 3" (6-76mm) |
C - Base | 16" X 19 1/4" (410 X490mm) |
Flashing Details: | |
Material | EPDM and Aluminum |
Advanced Ozone Resistance (tested to) |
70 hours @ 500 pphm |
High Temperature Resistance (tested to) |
Intermittent: +275°F (+135°C) Continuous: +212°F (+100°C) |
Low Temperature Resistance (tested to) |
-67°F (-55°C) |