KiloVault HAB V4 7.5kWh Lithium Battery Storage System - Puerto Rico

KiloVault® HAB™ Series
7.5kWh LiFePO4 Battery Storage System

The KiloVault® HAB™ Series wall-mount energy storage system provides a 7.5 Kilowatt-hour battery in a single package. Up to 14 units can be used together for additional capacity. The HAB Series has been designed for trouble-free mounting and is easy to connect with other system components.

Specifications:

Specifications:	HAB 7.5 V3	HAB V4
Rated Energy Capacity (Watt Hours)	7500 Wh
DC Voltage Nominal	51.2V
Nominal Amp-Hour Capacity	150 Ah
Optimal Charger/Inverter Settings	Bulk/Absorption: 56 V Float: NA (2-stage-no-float for charging cycle) Low Voltage Cut-Off: 48.2V Equalization: Disable. Do not use. (Battery will shut down into protection mode)
Maximum Battery Cut-Off Voltage	57.0V
Minimum Battery Cut-Off Voltage	48.2V
Max Charge Current*	50A (Continuous)
Max Discharge Current*	60A (Continuous)
Peak Discharge Current (<3 secs)	500A
Operating Temperature	Charging: 32 - 113°F (0 - 45°C) Discharging: -4 - 140°F (-20 – 60°C)
Storage Temperature	-4 to 110° F (-20° C to 45° C)
Cycle Life*	6000 (80% DoD)
Battery Management System	Monitors and optimizes charge & discharge for each battery in parallel and for each cell.   Provides overcharge, over discharge, temperature and short circuit protection for each battery.	BMS firmware and hardware have been updated to allow V2 and V3 versions to be used with V4, if expansion is needed.
Monitoring	Wireless on-site detailed battery status monitoring
Communications	Integrated HAB to Inverter Modbus communications w Amphenol on one end only. Integrated HAB to HAB CAN bus communications w RJ11 on both ends of cable.	Integrated HAB to Inverter Modbus communications w RJ45 on both ends of cable using the RS-485 standard. Integrated HAB to HAB CAN bus communications w RJ45 on both ends of cable.
Self-Discharge Rate	≤3% per month *Only achieved if HAB is put to sleep by pressing down the power button for 10 seconds, otherwise standard shutdown can cause self-discharge to be as high as 9% per month
Maximum Configuration	14 batteries in parallel
Compatibility	All versions of HABs can communicate with each other, as long as they are updated with the latest firmware versions. (*V1 updates can not be done over internet so please call in to have special update kit sent). Conditions: When adding in parallel configuration to an older bank, the newest HAB version must be the leader.  Communication cable is required.
Max Time Between Charges	6 months
Dimensions (L X W X H)	9.5 in x 22.5 in x 32 in
Weight	230 lbs
Ingress Rating	IP54 with vented plates IP55 with solid plates
Certifications	Cell Certifciations Only: UL1642; UL2580; IEC62133; IEC62619; UN38.3; OSHA 18001/ISO45001; ISO 9001/1400	Unit Certified ETL to UL Standard 1973; UL1642; UN38.3; IEC62619; OSHA 18001/ISO45001; ISO 9001/1400

*Manufacturer Operating Parameters by Charging Profile:

	10 Year Extended Life Warranty	7.5 Year Extended Charge Rate Warranty
Low Voltage Cut-Off	48.2V
High Voltage Cut-Off	57.0V
Discharge Rate	60A	150A
Charge Rate	50A	120A
Cycle Life	6000 cycles (80% DoD)	4000 cycles (80% DoD)