V2 mixed with V3 causing issues
I have 16 batteries. 8 are V2 and 8 V3. When I got the V3 they said mixing them should be fine. However now the website says I can’t do that because the BMS’s are incompatible and I have noticed a wide range of state of charge between them. The V2 will charge and discharge much faster. V2 can be at 50% SOC while the V3 can be at 80% SOC.
I was looking at getting the 48volt kilovault battery balancers, but I’m not sure if that will do any good if the BMS’s are compatible.
Any recommendations Alt-E?
1 of 1 customer found this useful