We are no longer offering this product.
The below information is presented for informational purposes only. You may also find similar items in the category.
- FEATURED PRODUCTS
- Solar Panels
- Solar Power Systems
- Productos Solares en Puerto Rico
- Charge Controllers
- Inverters
- Deep Cycle Batteries
- Solar Panel Mounts
- MORE PRODUCTS
- Cables & Wiring
- Enclosures, Electrical & Safety
- Heat Pump Water Heaters
- Inverter Power Panels & PreWired Systems
- Meters, Communications & Site Analysis
- Portable Power Systems
- Solar Water Pumps
- Voltage Converters
- Wind Turbines
- Books & Educational Videos
- * Clearance Sale *
- Hot Deals
Xantrex Freedom HF 1800W 12V 40A Inverter/Charger, 806-1840
Item code | Brand name | Model number | Volts | Watts | Waveform |
XANFRHF-1800 | Xantrex | 806-1840 | 12V | 1800W | Modified |
Xantrex
Freedom HF Inverter/Charger
1800W 12V Inverter with 40A Charger
806-1840
With modified sine wave output, Freedom HF 1000 and 1800 Inverter/Chargers are designed to run entertainment systems and small appliances in smaller boats, RV’s, and trucks. The Freedom HF 1800 is compliant with KKK-A-1822 standard for use in EMS applications.
The Freedom HF inverter/charger is available in two sizes: 1000 watts with a 20-amp charger and 1800 watts with a 40-amp charger. Both Freedom HF models are designed for demanding marine and RV conditions. Temperature-controlled multistage charging ensures that your batteries are recharged safely and efficiently. Both models include an automatic transfer switch and a detachable digital remote control panel display that provides precise system information and can be mounted wherever you require the information.
Features
- Automatic three-stage battery charger
- Built in ground fault and short circuit protection
- Designed to be hardwired using a terminal strip, or by connecting AC through GFCI receptacles (included)
- Built-in 30-amp relay to automatically transfer between inverter power and incoming AC utility power
- ETL listed for use in mobile RV and marine applications
- One Year Warranty
Specifications
Electrical Specifications - Inverter | ||
Models | HF 1000 |
HF 1800 |
Output Power (continuous) | 1000 W |
1800 W |
Surge Power | 2000 W |
3600 W |
Output frequency regulation | 60 Hz |
60 Hz |
Inverter frequency regulation | 115 +/-10 Vrms |
115 +/-10 Vrms |
Output wave form | Modified Sine Wave |
Modified Sine Wave |
Efficiency (full load) | > 82% |
> 82% |
Peak efficiency | > 87% |
> 87% |
No-load current draw (idle mode) | < 1 Adc |
< 1 Adc |
Off mode current draw (display off) | < 5 mA |
< 5 mA |
Electrical Specifications - Charger | ||
Charge rate | 20 A |
40A |
AC input voltage range | 95 - 130 VAC |
|
AC transfer relay | 30A |
|
Battery voltage (nominal) | 12 VDC |
|
Battery voltage range | 10.5 - 15.5 VDC |
|
Low battery cut-out | 10.5 VDC |
|
AC input (max. charge) | 5A AC |
9A AC |
Default bulk charge voltage setting | 14.2 VDC |
|
Default float charge voltage setting | 13.5 VDC |
|
Equalize charge voltage (wet cell only) | N/A |
|
Battery charge outputs | One |
|
Charge control | Three-stage |
|
Battery type settings | Flooded / Gel / AGM / Fixed 13.5 VDC |
|
Equalization | No |
|
Internal temperature-sensitive charging | Yes |
|
General Specifications | ||
Optimal operating temperature range | 32°F to 104°F (0°C to 40°C) |
|
Optional remotes | Detachable display |
|
Unit weight | 10 lb (4.5 kg) |
12.8 lb (5.8 kg) |
Unit dimensions (H x W x L) |
4.2 x 9.5 x 15.5" (106 x 241 x 393 mm) |
4.2 x 9.5 x 18" (106 x 241 x 457 mm) |
Warranty | One year |
|
Part Number | 806-1020 |
806-1840 |