Schneider Electric Conext XW Stacking Kit for 2 or 3 XW Inverters

Schneider Electric
Conext XW Stacking Kit
RNW865102002

The Conext XW Connection Kit is required for connecting a second or third XW+ Inverter/Charger in the same system.**This new kit does NOT come with AC breakers. Please see Add-Ons section to order Dual-Pole or Three-Pole Breaker Kits.

**NOTE 1: This kit is also used for stacking the XW+ Inverters with the old XW Inverters. Be sure to update the firmware first. The firmware on the XW+ needs to be updated to the XW firmware.

**NOTE 2: One kit is needed for 2 inverters.  An additional kit, so 2 kits total, is needed for a 3-inverter system. 

It includes the following:

XW+ Conduit Box (UL) - for attaching the bottom of 2nd or 3rd XW+ Inverter/Charger

4 Conduit Bushings for AC wiring knockouts, AC Sync, and Xanbus knockouts

DC positive busbar for up to 3 DC disconnect breakers.  Replaces factory-installed busbar.

250 Amp 160 VDC circuit breaker

Plastic cable ties **THESE ARE NOT INCLUDED as part of this product- just to secure parts in shipment - Schneider has NOT updated their documentation yet.

2 #4/0 AWG DC Battery cables for connecting  2nd or 3rd XW+ Inverter/Charger to Power Distribution Panel

5 #6 AWG cables for Grid, Load, and Neutral AC connections (labeled)

#4 AWG cable for grounding **THE MATERIALS LIST SAYS #2 AWG grounding cable - Schneider has NOT updated their documentation yet.  ***They are now using Polar Wire, which has a higher amperage rating than standard THWN wire often used.  The #2 wire THWN wire is listed for 115A, whereas the #4 Polar Wire is listed for 150A.

AC Sync and Xanbus cables for network communication

Shipping weight of box is 23 lbs.  Dimensions are 13 in × 12 in × 17.5 in.