We are no longer offering this product.
The below information is presented for informational purposes only. You may also find similar items in the
category.
Enphase Energy Envoy-S Communication Gateway
| ENPENVOY-S |
Enphase Energy |
ENV-S-AB-120-A |
Enphase Energy
Envoy-S Standard
Communications Gateway
The NEW Enphase Envoy-S Standard Communications Gateway delivers solar production data to Enphase Enlighten monitoring and analysis software for comprehensive, remote maintenance of your Enphase Microinverter system. This next-generation communications gateway introduces new capabilities that provide significant value for installers and system owners. It supports the current M-Series and the next generation S-Series of Enphase microinverters. Now with integrated Wi-Fi, you can connect wirelessly - no adapters required.
FEATURES:
Flexible networking options including integrated Wi-Fi
Can also use optional ethernet cable depending on the distance from the router
System configuration via Installer Toolkit mobile app
Connects up to 600 microinverters
Ready for optional plug-play 3G cellular modem
IP30 Rated for indoor installation or outside installation in a NEMA 3R enclosure
120 VAC, 60Hz AC Power Supply
5 Year Warranty
FAQs:
What does the Envoy do? It collects data from your microinverters, and sends the data - wirelessly via the internet - to the Enlighten website for you to view and monitor your system online. It also allows you to download software updates for your microinverters.
How often does Enlighten update my system data? Every 15 minutes you should see updated production data from your system.
How do I connect the Envoy-S to the internet? If your router supports WPS, press and hold the WPS button on your wireless router for a few seconds, until the WPS indicator begins flashing. If you are using the Mobile App, tap the 'Network' button, tap 'Wi-Fi', then tap your network from the list of available networks. If you are not using the Mobile App, initiate connection by pressing and holding the Envoy-S 'AP Mode' button for 5 seconds.
What's the best location for the Envoy-S? It's best to install the Envoy-S at the subpanel, or as close to the load center as posssible. This ensures that you get the strongest possible signal from each microinverter. You want it in a protected space, such as a garage, attic, basement - as long as it's cool and dry. NOTE: Do NOT plug the Envoy-S into a power strip, surge protector , or UPS. The filtering within these devices impedes communication performance, and caauses interference.
How much power does the Envoy use? Typical consumption is 2.5 watts of power.
How do I monitor the data from my system? Since the new Envoy-S no longer has an LCD display, you have to view it on your mobile device or computer.
![enphase]()
