Outback Power FLEXpower TWO FP2 VFXR3524A 7kW Pre-Wired Inverter System (UL1741-SA)

Outback Power FLEXpower TWO FP2 VFXR3648A 7.2kW Pre-Wired Inverter System (300VDC)

NOTE: Those models with an -01 at the end are listed to UL1741-SA.

Outback Power
FLEXpower TWO FXR Pre-wired Dual Inverter Systems

The FLEXpower TWO is the perfect solution for medium-sized power requirements such as larger residential homes, back-up power systems, or light commercial applications including farms, or small businesses. The FP2 system is designed with all necessary components integrated into a compact hang-on-the-wall system for a minimal footprint. Additionally, the FLEXpower TWO can be mounted in either a horizontal or vertical orientation to allow installation in more space-limited locations. They now come equipped with the updated FXR series Grid/Hybrid inverter/chargers. This means that the most advanced Grid/Hybrid inverter features are now available on the industry’s most trusted and proven systems platform, for unmatched flexibility and value. The FLEXpower TWO FXR is available in seven models for 120VAC or 230VAC applications ranging from 5000W to 7200W. The units are field selectable for 50Hz or 60Hz, and each system is field upgradable to eliminate downtime during critical updates. If you're looking for a time saver and a convenient way to get your system up and running more quickly, the FLEXpower TWO is your answer!

FEATURES:

With the new FXR units, all of the balancing applications are accomplished with the firmware inside the unit - so no transformer needed

Factory tested, pre-wired, and pre-configured systems

Fast installation - just hang on the wall with the bracket (included) and make connections

Off-grid and grid-tied functionality in one flexible system

Powerful system in a compact, space-saving footprint

Field-upgradable software eliminates system down-time for critical updates

Ample AC and DC breaker provisions

GridZero technology effectively lets users zero out the utility grid if enough renewables are present, reducing or even eliminating grid dependence

Advanced Battery Charging (ABC) supports a wide range of battery technologies including lithium-ion

All components carry necessary ETL certifications

Each FLEXpower TWO system comes pre-wired with:

2 FXR Inverter/Chargers - either Sealed (for high humidity or salt-air environments) or Vented (with screened openings for drier environments) versions

2 FLEXmax 80 MPPT Solar Charge Controllers

MATE3 System Display and Controller - comes pre-loaded with Optics RE so you can monitor and control your system remotely

HUB 10.3 Communications Manager

FLEXnet DC Battery Monitor

FLEXware Surge Protector

AC and DC Wiring Boxes

Battery and PV Breakers

PV GFDI

Input-Output Bypass Assembly

Mounting bracket

Mounting locations for GFCI outlets and additional AC breakers

FLEXpower TWO FXR Series Options:

Specifications:	FP2 FXR2524A	FP2 FXR3524A	FP2 FXR3048A	FP2 VFXR3524A	FP2 VFXR3648A	FP2 V3648A-300AFCI
AC Voltage/Frequency Output (selectable)	120/240VAC, 50/60Hz
Inverters	Sealed Inverter - FXR2524A (x2)	Sealed Inverter - FXR3542A (x2)	Sealed Inverter - FXR3048A (x2)	Vented Inverter - VFXR3524A (x2)	Vented Inverter - VFXR3648A (x2)
Charge Controller	FLEXmax 80					FLEXmax 100AFCI
Output power (continuous) at 25°C	5000 W	7000 W	6000 W	7000 W	7200 W
Nominal DC Input Voltage	24 VDC		48 VDC	24 VDC	48 VDC
Bypass	240VAC
Remote Temperature Sensor	Yes
Inverter Overcurrent Protection Device	175A		250A		175A
PV Overcurrent Protection Device	80A
Shipping Weight	354 lbs

FLEXpower TWO Installation Tips:

Ensure the mounting surface is strong enough to handle 3 times the total weight of all the components.

Using additional people to assist with lifting, place the panel on the wall. Ensure the panel is level.

Secure the panel into the surface using a minimum of 10 lag bolts (or other appropriate hardware).