- FEATURED PRODUCTS
- Solar Panels
- Solar Power Systems
- Productos Solares en Puerto Rico
- Charge Controllers
- Inverters
- Deep Cycle Batteries
- Solar Panel Mounts
- MORE PRODUCTS
- Cables & Wiring
- Enclosures, Electrical & Safety
- Inverter Power Panels & PreWired Systems
- Meters, Communications & Site Analysis
- Portable Power Systems
- Solar Water Pumps
- Voltage Converters
- Wind Turbines
- Books & Education
- * Clearance Sale *
- Hot Deals
- Open Box & Refurb Deals
Outback FlexPower Pre-Wired Radian, FPR-4048A (UL1741-SA)
Outback Pre-Wired Radian 4048A w/ FM100 AFCI
Outback Pre-Wired Radian 8048A w/2 FM100 AFCI
Outback Pre-Wired Radian 8048A w/1 FM100 AFCI
| Item code | Brand name | Model number | Volts | Watts | Waveform |
| OUTFPR4048A1 | Outback | FPR-4048A-01 | 48V | 4000W | Pure |
| Item code | Brand name | Model number | Volts | Watts | Waveform |
| OUTFPR4048A300A | Outback | FPR-4048A-300AFCI | 48V | 4000W | Pure |
| Item code | Brand name | Model number | Volts | Watts | Waveform |
| OUTFPR8048A300A | Outback | FPR-8048A-300AFCI | 48V | 8000W | Pure |
| Item code | Brand name | Model number | Volts | Watts | Waveform |
| OUTFPR8048A3ALT | Outback | FPR-8048A-300A-LT | 48V | 8000W | Pure |
Outback Power FLEXpower Radian Pre-wired Inverter System
Important note about FLEXpower Radian Systems:
Due to supply chain issues at OutBack, the MATE3s that would normally be part of a FLEXpower Radian system has been replaced with a MATE3SL. The MATE3SL is identical in function to the MATE3s except that it is a local-only control device and does not connect to the internet or to OutBack's system monitoring service, OpticsRE.
To add OpticsRE functionality to your FLEXpower Radian system, click here to complete OutBack's short form to have OutBack ship you a MATE3s when they are available at no charge to you. You can find the MATE3SL serial number needed for the form on the back of the MATE3SL unit or by navigating to LOCK-->141-->Settings-->System-->Serial Numbers when it is powered up.
When your MATE3s arrives and you are ready to replace your MATE3SL with it, referring to the MATE3s programming guide and this video on saving and restoring MATE configurations may be helpful. If you are having trouble, call altE at 877-878-4060.
Save up to ½ day installation time on a typical job site, with the OutBack's pre-wired FLEXpower Radian Inverter system! All components are already in place and connected - just secure the complete FLEXpower system to the wall, make AC and DC connections, and you're done - on to the next job!
OutBack's pre-assembled and pre-wired power systems take the concept of fast, easy installation to a new level of performance, value, and flexibility:
- The 4kW FLEXpower Radian (FPR- 4048A) is ideal for smaller power applications — including homes, cabins, remote communication sites and backup power systems.
- The 8kW FLEXpower Radian (FPR-8048A) is ideal for applications with medium-sized power requirements—including larger homes and light commercial or backup power systems.
Outback Power FLEXpower Radian Pre-wired Inverter System Features:
- Backplate and wall bracket included for easy mounting, with all components pre-configured, wired and factory tested
- Fast installation with a pre-assembled system and fully integrated GS load center
- Optimized system footprint
- GridZero technology optimizes the balance between stored and renewable energy sources, minimizing grid dependence (see video below)
- Advanced Battery Charging (ABC) supports leading-edge battery technologies, including lithium-ion
- Dual AC inputs for seamless generator integration in grid-interactive applications
- Grid-interactive and stand-alone capability in one unit
- System monitoring via web interface with OPTICS RE
- Components carry all of the necessary UL certifications - ie UL1741-SA
- Standard 5-Year Warranty
Outback Power FLEXpower Radian Pre-wired Inverter System Specs:
Outback Power FLEXpower Radian Pre-wired Inverter System Includes:
- OutBack Radian Series inverter/charger
- OutBack FLEXmax charge controller(s)
- MATE3 system display and communications (see important note on MATE3s / MATE3SL above)
- FLEXnet DC system monitor
- AC and DC wiring boxes
- HUB 10.3 communications device
- Surge protector
- Remote temperature sensor (RTS)
The FLEXpower Radian is also equipped with battery and PV array breakers, GFDI, and input/output bypass. **NOTE: GFDI is integrated in the FM100 charge controller with 300VDC models.
