- FEATURED PRODUCTS
- Solar Panels
- Solar Power Systems
- Battery Backup Solar Power Systems
- Productos Solares en Puerto Rico
- Charge Controllers
- Deep Cycle Batteries
- MORE PRODUCTS
- Cables & Wiring
- Enclosures, Electrical & Safety
- Heat Pump Water Heaters
- Inverter Power Panels & PreWired Systems
- Meters, Communications & Site Analysis
- Portable Power Systems
- Solar Panel Mounts
- Solar Water Pumps
- Voltage Converters
- Wind Turbines
- Books & Educational Videos
- * Clearance Sale *
- 2020 Solar Installer Conference
NEC 2011 Compliant Label: Photovoltaic Power Source Shingle Label
|Item code||Brand name||Model number|
|HLRPVPSRTM||Hellermann Tyton Corp.||PVPSRTM|
Hellermann Tyton Corp.
NEC Compliant Label
Photovoltaic Power Source Roof Shingle Marker
Labels are applied by hand to PV installations where durable UV resistant marking is required. For use to identify EMT conduit concealed under roofing materials.
Pre-Printed Reflective Solar Labels are made using high performance UV stable materials and adhesives. Designed to meet NEC and IFC standards for PV installation labeling, the pre-printed Reflective Solar labels come printed with the most common legends required by the AHJ (Authority Having Jurisdiction) used on large utility and scaled projects. Labels are UV stable and made with special high bond adhesives to stick to both powder coat painted surfaces and baked enamel surfaces found on most disconnect switches and breaker boxes. The reflective inks meet the fire safety standards of the IFC (International Fire Code) and also meet the requirements of UL969.
Circuit Routing: NEC Article 690.4 (F) - Where circuits are embedded in build-up, laminate, or membrane roofing materials not covered by PV modules and associated equipment, the location of circuits shall be clearly marked.
|Width (W)||6.75" / 171.4mm|
|Material and Specifications|
|Operating Temp.||-40F to +180F|
|UL Recognized (US and Canada)||Yes|
There are no reviews for this product.