877-878-4060

We are no longer offering this product.

The below information is presented for informational purposes only. You may also find similar items in the category.
SHOP ALL PRODUCTS
V

High Power Relay, 12V DC, 100A for Load Diversion Controllers

High Power Relay, 12V DC, 100A for Load Diversion Controllers
High Power Relay, 12V DC, 100A for Load Diversion Controllers
 
Item code Model number
AERRELAY12V100A RELAY-100A-12V
High current relay, 100 amps, rated for 12 volts DC use. Use in conjunction with a voltage controlled switch and two 1000 watt resisitor coil (.75 Ohms) to make a dump load for wind turbines or micro hydro turbines.


100 Amp Relays
For Diversion Loads


A Diversion Load is a critical part of the system, without DL the turbine should not be up and flying. A Diversion Load is an automated safeguard system that enables expanded wind turbine performance while preventing overcharge at the battery. Small wind turbines are commonly misunderstood when it comes to dump-loads. The most common misconception regarding DL is the myth of wasting energy. Dump loads are infrequent, yet their existence is critical to reliable performance of the wind system.

Generally DL energy becomes heat when diverted from controller to resistor. This energy can be infrequently beneficial to warm the mechanical room where this equipment is installed. This energy can also be relocated away from the power system and utilized in home station and livestock applications. In warmer months additional uninterruptible DL can be utilized. This can be a properly rated DC motor, pumps, fans, lights, etc. An alternate DL must be properly sized in Ohms resistance , wattage value, and be fully capable of operating under variable voltage conditions.

 


Click here for BBB Business Review ASE NESEA Member
Paypal Visa MasterCard Amex Discover
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams