877-878-4060
SHOP ALL PRODUCTS
V

Midnite Solar E-Panel, Gray Steel (stretched), 125A for Outback Inverters

Midnite Solar E-Panel, Gray Steel (stretched), 125A for Outback Inverters
Midnite Solar E-Panel, Gray Steel (stretched), 125A for Outback Inverters
$429.91 List price $559.00

Estimate Shipping
Item code Brand name Model number Amps
MIDMNE125STS-L Midnite Solar, Inc. MNE125STS 125A

Midnite Solar Midnite E-Panel STS

Midnite Solar
E-Panel for Outback Inverters
Gray Steel, 125A, "Stretched"
AC/DC Enclosure
MNE125STS

All Outback E-Panels work with FX, VFX, GFX, and GVFX inverters.

The MidNite Solar E-Panel comes standard with the basic over-current protection and disconnects required to install your renewable energy system. It can also expand to grow as your needs arise. The E-Panel integrates high voltage PV input, charge controller outputs, inverter over current protection, DC load circuits, AC input disconnect, AC input/output bypass, AC load circuits, DC-GFP circuit, and possible other charging source circuits. The pre-wired design saves in installation time, costs and complexity.

The Midnite Solar E-Panel is a compact, affordable panel for mounting a single inverter. But it is also modular for mounting multiple inverters. Unlike other Power Systems that tend to take up a large amount of horizontal space, by using a vertically stacked pair of E-Panels you can have two inverters in about the same space as a broom closet. The gray steel E-Panels are available in both a "narrow" and "stretched" version. The Stretched version (STS) utilizes the 14.5" wide chassis to provide 5" of additional wiring room.

Features

  • Gray powder coated Steel chassis with all the required openings and knock outs to aid in a NEC compliant system installation
  • Pre-wired with all field wiring connections clearly labeled
  • Inverter mounts on a unique hinged door to keep the footprint of the system small as possible
  • Mounting brackets are included to aid in one person installations
  • Three slots for ¾" wide panel mount breakers
  • Six slots for ½" wide din rail mount breakers
  • 500 amp / 50mv shunt included for battery monitoring systems
  • Heavy duty 125 amp DC Inverter Battery breaker
  • 50A AC input disconnect for generator or utility included
  • 50A Inverter AC bypass switch
  • Bus bars are included for Battery Plus, Battery Minus and Ground
  • Battery cable cover to enclose cables external to the chassis
  • Inverter and charge controller mounting hardware
  • Rectangular cut outs for mounting North American GFCI style AC outlets
  • ETL listed to UL and Candian standards

Another plus of the E-Panel is that with the unique hinged door, you mount the inverter to the door while it lays flat on your bench and then simply hang it on the panel which has already been mounted to the wall. You simply lift it up, insert tab "A" into slot "B" and you are done. There are no fasteners required at this point, so no need to try to balance an inverter and remember where you left your extra set of hands. It's no longer necessary to call the local crane company nor three of your friends to help you with the install. One person can do it quite nicely, as shown in the four consecutive steps below.

E-panel installation step 1 E-panel installation step 2 Epanel installation step 3 Epanel installation step 4

System Options (Click Model Number for more Information)

Model Number Descriptions -
Gray Steel E-Panels for Outback Inverters (narrow - ST)
For Use With Outback Inverter Models:
MNE125ST Gray steel chassis with 125 Amp 125 VDC inverter breaker FX3048T, , FX2532MT, FX2348ET
MNE175ST Gray steel chassis with 175 Amp 125 VDC inverter breaker FX2524T, VFX3648, FX2524MT, VFX3232M, FX2024ET, VFX3048E
MNE250ST Gray steel chassis with 250 Amp 125 VDC inverter breaker FX2012T, VFX2812, VFX3524, GVFX3524, FX2012MT, VFX2012ET, VFX2612E, VFX3024E, VFX2812M
Model Number Descriptions -
Gray Steel E-Panels for Outback Inverters (stretched - STS)
For Use With Outback Inverter Models:
MNE125STS Gray steel chassis with 125 Amp 125 VDC inverter breaker FX3048T, , FX2532MT, FX2348ET
MNE175STS Gray steel chassis with 175 Amp 125 VDC inverter breaker FX2524T, VFX3648, FX2524MT, VFX3232M, FX2024ET, VFX3048E
MNE250STS Gray steel chassis with 250 Amp 125 VDC inverter breaker FX2012T, VFX2812, VFX3524, GVFX3524, FX2012MT, VFX2012ET, VFX2612E, VFX3024E, VFX2812M
Model Number Descriptions -
White Aluminum E-Panels for Outback Inverters
For Use With Outback Inverter Models:
MNE125AL White Aluminum chassis with 125 Amp 125 VDC inverter breaker FX3048T, GTFX3048, FX2532MT, FX2348ET
MNE175AL White Aluminum chassis with 175 Amp 125 VDC inverter breaker FX2524T, VFX3648, FX2524MT, VFX3232M, FX2024ET, VFX3048E
MNE250AL White Aluminum chassis with 250 Amp 125 VDC inverter breaker FX2012T, VFX2812, VFX3524, GVFX3524, FX2012MT, VFX2012ET, VFX2612E, VFX3024E, VFX2812M
Model Number Descriptions -
White Aluminum, "Super-Wide" E-Panel Plus
for Outback Inverters
For Use With Outback Inverter Models:
MNE125ALPLUS Stretched white aluminum E-Panel with FM60/80/Classic mounting on the door. Left hand unit only. 125 Amp 125 VDC inverter breaker FX3048T, VFX3648, GTFX3048, GVFX3648
MNE175ALPLUS Stretched white aluminum E-Panel with FM60/80/Classic mounting on the door. Left hand unit only. 175 Amp 125 VDC inverter breaker FX3048T, VFX3648, GTFX3048, GVFX3648, FX2524T, GTFX2524
MNE250ALPLUS Stretched white aluminum E-Panel with FM60/80/Classic mounting on the door. Left hand unit only. 250 Amp 125 VDC inverter breaker FX2012T, VFX2812, VFX3524, GVFX3524
Add-on Options
MNEPV63 63 amp 125VDC din rail mount breaker (13 mm wide) Use for charge controller input and output disconnect
MNDC-GFP 63 amp DC ground fault protector

Write a review

There are no reviews for this product.

Click here for BBB Business Review ASE NESEA Member
Paypal Visa MasterCard Amex Discover
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams