Midnite Solar MNPV6 Disconnect/Combiner Box

Midnite Solar
MNPV Disconnecting Combiner Box
MNPV6 DISCO COMBINER

The MNPV6 Disco combiner is rated for outdoor use. Designed for combining a max of 6 PV strings rated up to 150VDC, 120 amps total output.

The MNPV6 Disco is very flexible. It is ETL listed for AC and DC this allows you to configure it for several different uses. It will work with 1-6 din rail mount, 150V DC breakers. The combiner also works with 1 of our 600 volt DC breakers for a grid tie disconnect you can also install a 240 volt AC breaker with the 600 volt DC breaker to make a complete disconnect for a grid tie inverter. This configuration makes a compact Grid Tie disconnect for those applications where the built in switch won’t do the trick.

Features

• Convenient disconnect handle
• All aluminum powder coated housing that won’t rust
• Flip up cover that can stay in the open position during installation
• PV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)
• PV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)
• Standard din rail to mount up to 6, 150V breakers
• 120 Amp tin plated copper bus bar to combine breaker outputs - bus bar may be split in two
• Dead front cover snaps into place after wiring is complete for safety

Applications

• PV combiner up to six strings using MNEPV 150 VDC breakers with the MNPV6 Disco
• AC Combiner for up to three strings for use with micro inverters using MNEAC 240 VAC Breakers
• DC load center using MNPV breakers

Please Note: This is an enclosure only, circuit breakers must be purchased separately.

For more information about the MNPV6 Disconnecting Combiner Box, check out this new video from Midnite!