- FEATURED PRODUCTS
- Solar Panels
- Solar Power Systems
- Productos Solares en Puerto Rico
- Charge Controllers
- Inverters
- Deep Cycle Batteries
- Solar Panel Mounts
- MORE PRODUCTS
- Cables & Wiring
- Enclosures, Electrical & Safety
- Inverter Power Panels & PreWired Systems
- Meters, Communications & Site Analysis
- Portable Power Systems
- Solar Water Pumps
- Voltage Converters
- Wind Turbines
- Books & Education
- * Clearance Sale *
- Hot Deals
- Open Box & Refurb Deals
SolaDeck 0799-2G Flashed PV Roof Mount Enclosure, Gray
SolaDeck 0799-5G Flashed PV Roof Mount Enclosure, Gray
SolaDeck 0799-2B Flashed PV Roof Mount Enclosure, BLack
SolaDeck 0799-5B Flashed PV Roof Mount Enclosure, Black
| Item code | Brand name | Model number |
| RST0799-2G | Soladeck | 0799-2G |
| Item code | Brand name | Model number |
| RST0799-5G | Soladeck | 0799-5G |
| Item code | Brand name | Model number |
| RST0799-2B | Soladeck | 0799-2B |
| Item code | Brand name | Model number |
| RST0799-5B | Soladeck | 0799-5B |
SolaDeck 0799 Series 600V Flashed PV Combiner/Passthrough Box
SolaDeck 0799 PV Combiners are flashed, seamless, weather-tight enclosures used to combine or pass through wiring of AC or DC circuits, such as connecting outdoor PV wiring to house wiring. They are NEMA 3R rated and provide a flashed roof penetration for composition shingle and cedar shake roofs.
The SolaDeck 0799 Photovoltaic Combiner Enclosure eliminates the multiple parts and respective labor typically needed to accomplish the roof penetration for a weather-tight wiring passageway into the home.
Two SolaDeck ER Terminal Blocks are needed for each string passing through (one for positive wire, one for negative wire). The 0799 series enclosures can hold a maximum of 12 ER Terminal Blocks, which would allow pass-through of 6 circuits.
All SolaDeck models are third party tested by ETL to the UL50 Type 3R and UL 1741 standards. This ensures high quality and reliability of every model.
SolaDeck 0799 Series 600V Flashed PV Combiner/Passthrough Box Features
- 18-gauge galvanized 90 steel and powder-coated finish provides a professional appearance (choose black or gray)
- NEMA 3R rated
- 15.25" X 17.25" X 3"H flashing for shingle/shake roofs
- Slotted cover locks into place with a pre-installed set screw - no more loose cover screws!
- Lower profile cover allows side and bottom penetration to the sidewalls
- Pre-installed din rail can be used horizontally or vertically depending on your installation requirements
- Pre-installed ground block (choose 2-position or 5-position)
- 2-position models accept wire sizes 2/0 - 14 AWG
- 5-position models accept wire sizes 14 - 4 AWG
- Eight roof-deck knockouts in the base (six ½", one ¾", one 1")
- Two ¾" pre-punched holes at the base
- Two NEMA 4 plugs come installed but can be removed to insert conduit/fitting without needing to drill
- Listed and labeled to UL 1741 standards
- Made in the USA
