Crown Sealed AGM Batteries

Model:

Select model:

Details
Documents
Box Contents
Contents
Add-ons
Similar Products
Questions?
Reviews

Crown Battery
Sealed AGM
Deep Cycle Batteries

Crown Battery sealed AGM (Absorbed Glass Mat) lead acid batteries are maintenance free! Made in the USA - since 1926, Crown has distribution centers across the country - in CT, OH, and CA. Crown stands behind their motto, "The Power Behind Performance". They build the best available batteries for the customer, who is their first priority. Quality system excellence in manufacturing, engineering, and customer service, allows them to deliver an exceptional value across all classes of product.

FEATURES - What makes Crown Battery stand out among the competition?:

Thicker, fuller frame and grid design ensures structural integrity throughout product life, and greater cycle life

Inset "Centerline" plate lug feature ensures best available electrical efficiency during charge and discharge

Signature "Diamond" grid wire design optimizes grid surface area within the plate core, for improved active material adhesion, as well as minimal exposure to electrolyte, which reduces premature grid corrosion

Higher antimony content for high performance cycling, and increased current flow

Higher density lead oxide on the plates , through industrial oven-curing process, gives greater durability to the plates which leads to longer discharge times and longevity of the battery

One piece solid cast-on strap with integrated terminal post and through-partition structures provide less vibration, which leads to better plate longevity, and overall cycling performance

2 Year Full Replacement Warranty

Battery Specifications:

BCI Group Size	Model	Capacity Amp-Hours (20-Hr Rate)	Voltage	50% DOD Cycles	Length	Width	Height	Weight	Terminal
31	12CRV110	110 AH	12V	600	13.00"	6.77"	10.17"	60 lbs	Standard
921	12CRV230	230 AH	12V	950	15.52"	7.01"	14.53"	145 lbs	Standard
902	6CRV330	330 AH	6V	1000	11.62"	7.01"	14.59"	103 lbs	Standard
903	6CRV390	390 AH	6V	1000	11.62"	7.01"	16.75"	127 lbs	Standard

NOTE: See DOCUMENTS tab above for full line of Crown AGM Batteries.

Maintenance Tips from Crown Battery - for improved longevity and cycle life:

The two most important tools for taking readings from your battery bank are a Hydrometer, and a Voltmeter

Manufacturer recommends not to have more than 2 strings per battery bank, to ensure maximum amperage in each string in a 4 hour time frame. This way, the batteries can get to the next stage in the charging process and then start cooling down. All of this is to get the batteries back to 110% charged.

Depth of Discharge on the battery bank should be no more than 50%, with 30% being ideal

Ideally, the battery bank in an off grid system should be at full charge by late morning/early afternoon - Voltmeter readings of 2.12V per cell AND specific gravity readings of 1.265 or higher, indicate a fully charged battery

The 'perfect' battery cycle for top performance is: Full charge at late morning/early afternoon - then Float/rest throughout afternoon/early evening - then Discharge throughout the night - and Recharge again in the morning/early afternoon

Suggested charging current is 8-12A of deliverable current, for every 100 Ah of battery ban capacity

Charging must restore 100% of battery charge to ensure required performance and life, and to fully charge, approximately 110% of what was removed, must be replaced. Example:

400Ah battery bank discharged to 50% DOD. 200 Ah removed, so 222 Ah must be replaced (110%)

50A rated charge controller, with 60% correction = 30A of deliverable current

This equates to 7.4 hours to fully charge the battery bank back (222 Ah/30A)

Battery Cables should be sized to handle the expected load. Table values below are for cable lengths less than 6 feet.

Crown Sealed AGM Batteries

Crown Battery Sealed AGM Deep Cycle Batteries

Crown Battery
Sealed AGM
Deep Cycle Batteries