SimpliPhi Power
Energy Storage System

NEW from SimpliPhi!  SimpliPhi has designed an all new Energy Storage System that includes a 6kW hybrid inverter, 4.9kWh Lithium Ferro Phosphate (LFP) battery, and gateway - all modular components that allows for scalable power, and energy independence based on your application and needs.

FEATURES:

• Add batteries and inverters over time to increase power output and get through extended power outages
• Add up to 72 batteries, and up to 9 inverters for up to 350kWh storage capacity and 54kW of load support
• Energy management software platform allows for information at your finger tips so you can effectively manage your ESS
• Rated for indoor or outdoor installation (*Note: Battery charge temp can not be below freezing or over 120F)
• Applications include on grid, off grid, or AC/DC coupling for adding storage to your grid tie system down the line
• Battery has closed loop communication with SimpliPhi inverter, as well as SMA and Sol-Ark inverters, which allows for easy programming of system components
• Battery has safe LFP technology, reducing risk of thermal runaway.  No ventilation required.
• Integrated battery management system (BMS) protects the batteries and increases longevity by extending cycle life
• Mobile app gives remote visibility for system performance and trouble-shooting
• Battery can receive over-the-air firmware updates with all compatible inverters when properly connected to the EnergyTrak gateway.  This will ensure apps and systems are secure and code-compliant with the latest features.
• Hybrid inverter can be used for Time of Use applications, peak demand shaving, and backup power.  Can also be paired with other batteries.
• Wifi, ethernet, and bluetooth connectivity for simple, dynamic communications
• Up to 10 year warranty



BATTERY Specifications:

Specifications:	SPHI-B-4.9
DC Voltage Nominal	51.2 VDC
Amp Hours	97 Ah
Rated Wh Capacity	4.9 kWh (100% DoD) 3.9 kWh (80% DoD)
Max Continuous Discharge Current (C/2)	48.5A
Max Continous Charge Current (C/2)	48.5A
Max Surge Discharge Rate (10 min)	100A
DC Voltage Range	48V - 56V
Depth of Discharge	up to 100%
Operating Efficiency	96%
Operating Temperature	-4 to 140°F (-20 to 60°C)
Charge Temperature	32 to 120°F (0 to 49°C)
Storage Temperature	6 months: 14 to 77°F (-10 to 25°C) 3 months: -4 to 113°F (-20 to 45°C)
Self Discharge Rate	Less than 1% loss/month (when off)
Cycle Life	10,000 (80% DoD)
Memory Effect	None
IP Rating	IP65
Mounting	Wall mount only
Communications	CANBUS
Dimensions W x H x D	23 x 28.5 x 8.5 inches/3.2 cu ft  (30"H w/terminals) (584 x 7245 x 215.5 mm/0.10m3)
Weight	160 lbs (73 kg)
Warranty	10 Years
Terminals and Cables	3/8" terminals 4/0 Parallel - up to 4 batteries per string
Certifications	UL 1642, UL 1973, UN 3480 and UN DOT 38.3




INVERTER Specifications:

Specifications:	SPHI-IN-6
Battery Input Voltage	48 VDC
Max Solar DC Input	7.5 kW
Integrated MPPT Charge Controllers	2 inputs with 2 strings each
Loads Supported	120/240 VAC
Max Continuous Power	6000W
Max Output Power	6000W
Instantaneous Power (100ms)	12000W
Surge Power (5 sec)	9000W
CEC Weighted Efficiency	96.5%
Parallel Stacking	Up to 9 inverters
Auto Generator Start	Included
Monitoring	EnergyTrak Gateway
IP Rating	IP65
Operating Temperature	-13 to 140°F (-25 to 60°C)
Dimensions W x H x D	20.28 x 27.55 x 8.5 inches (515 x 700 x 215.5 mm)
Weight	86 lbs (39 kg)
Warranty	10 Years
Certifications	UL 1741 SA/SB, IEEE 1547.1-2020, IEC/EN 62109-1&2, EN 61000-6-2&3, EN 61000-3-11&12
Safety Features	Rapid shutdown, Arc fault protection, PV reverse polarity protection, Ground fault monitoring, Residual current monitoring, Insulation resistor detection, Overcurrent protection, Short circuit protection