877-878-4060

We are no longer offering this product.

The below information is presented for informational purposes only. You may also find similar items in the category.
SHOP ALL PRODUCTS
V

Surrette Batteries 4-CS-17PS 4V, 546Ah (20Hr) Flood L-Acid

Surrette Batteries 4-CS-17PS 4V, 546Ah (20Hr) Flood L-Acid
Surrette Batteries 4-CS-17PS 4V, 546Ah (20Hr) Flood L-Acid
 
Item code Brand name Model number Volts Amp Hours
SUR4-CS-17PS Surrette Batteries 4-CS-17PS 4V 546Ah

Rolls Solar Batteries by Surrette

Cycle Life - 4000 Series

Surrette Flooded Batteries
Rolls Solar Series

Surrette Battery Company Ltd. and the manufacturing facility is located in Springhill, Nova Scotia on the East Coast of Canada. Established in 1935, with a production facility in Salem, Massachusetts, Surrette relocated to Canada in 1959 and is the Nation's only remaining independent battery manufacturer. Rolls deep cycle batteries have been manufactured in our plant for over 50 years. Our Series 4000 system of batteries, manufactured specifically for SOLAR and other renewable energy applications, are designed to offer up to 12 years of life!

"SOLAR" Series 4000 Features

  • Use of thickest plate, highest density active material in plate construction.
  • Many of our batteries are constructed with structural foam containers.
  • Enveloped Separators
  • Increased Liquid Reserve

SPECS AT A GLANCE
Voltage: 6, 8, 12
Plate Alloy: 4% Antimony
Post Type: Flag (Typical)
Chg Volt: Float 2.2 -2.3 VPC Bulk 2.37 -2.40 VPC
Sp. Gravity: 1.265
Electrolyte: Sulfuric Acid

Benefits

  • Unsurpassed cycling service, 10 year average life expectancy.
  • Less weight
  • Greater rigidity
  • Greater durability
  • Ability to remove sediment chamber, eliminating separator mis-alignment, treeing, and shorting
  • Allows for higher plates to be used in the same sized cell, thus yielding greater capacity
  • Less maintenance

Cycle Life - 5000 Series

The Surrette Rolls Series 5000 system of batteries, manufactured specifically for SOLAR and other renewable energy applications, are designed to offer up to 20 years of life thanks in part to their "Non-Breakable", dual container (modular) construction.

"SOLAR" Series 5000 Features

  • Dual Container Modular Construction
  • Coupling of our thick plate design with highest density active material
  • Enveloped Separators
  • Increased Liquid Reserve
SPECS AT A GLANCE
Voltage: Various
Plate Alloy: 4% Antimony
Post Type: Flag (Typical)
Chg Volt: Float 2.2 -2.3 VPC Bulk 2.37 -2.40 VPC
Sp. Gravity: 1.265
Electrolyte: Sulfuric Acid

Benefits

  • Elimination of "stray" current.
  • Environmentally friendly.
  • No acid leakage.
  • Easy "on-site" assembly/disassembly. (No special tools or skills required.)
  • Drastic reduction in connections, eliminating many points of failure, thus increasing charging efficiency.
  • Unsurpassed cycling service - 15 years average life!
  • Ability to remove sediment chamber, eliminating separator mis-alignment, treeing, and shorting.
  • Allows for higher plates to be used in the same sized cell, thus yielding greater capacity.
  • Less maintenance.

Surrette's "Dual Container" Construction

More Power - Less Weight

Supplied in a Dual Non-Breakable Container, the new design eliminates breakage due to rough handling and abuse. Repairs are simpler and less time consuming. Short circuits from water, dirt, and falling metal objects are eliminated due to a moisture tight protective outer cover.

Environmentally Friendly No Acid Leakage

The new generation of batteries utilizes dual container construction. Each cell is assembled in its own inner container made of high temperature retardant, durable polypropylene with the inner cover heat bonded to the container,(thus acid leakage is eliminated). The cells are then assembled into a high density tough polyethylene outer container with a removable lid. Even if the outer container were to break the battery would still be operable without the harmful affects of sulfuric acid spills.

Optional Cell Connection

Cell replacement is now less frequent, but if necessary, Surrette makes it clean and quick. As an option the individual cells can be bolted together allowing the battery to be repaired, or assembled on location. Cell replacement can be accomplished without special skills or tools.

Enveloped Positive Plates

The positive plates are doubled insulated. The first layer consists of a thick woven glass mat. The plate and matting are then sealed in a non-destructible, microporous, polyethylene envelope. The envelope eliminates the possibility of separator misalignment, cracked separators, treeing, or shorting at the bottom or sides. The sediment chamber is eliminated allowing more liquid space above the top of the cell, thus lengthening periods between watering.

Rugged Plate Construction

The Rezistox Plate Design uses fewer, but heavier, members in the grid (current carrying conductor). More metal where it counts. The heavier members offer more resistance to positive grid peroxidization (corrosion), and allow for greater percentage of power producing active material. (The grid and active material are referred to as the plate.)

Surrette Rolls Battery Specifications
(look for the appropriate model number)

NOTE: VPC = Volts Per Cell

2 Volt (1 Cell)
Surrette

Series Model Plate Code Warranty
(months)
Plates per
cell
Seperator Type Cap (100AH - 1.75 VPC) Cap (72AH - 1.75 VPC) Cap (20AH - 1.75 VPC) Length Width Height Wet
Weight
5000 2 KS 33PS KS 120 33 EN/GL 2480 2349 1766 15 7/16" 8 5/16" 24 13/16" 208 lbs.

4 Volt (2 Cell)
Surrette

Series Model Plate Code Warranty
(months)
Plates per
cell
Separator Type Cap (100AH - 1.75 VPC) Cap (72AH - 1.75 VPC) Cap (20AH - 1.75 VPC) Length Width Height Wet
Weight
5000 4-CS-17PS CS 120 17 EN/GL 770 726 546 14 3/8" 8 1/4" 18 1/4" 128 lbs.
5000 4-KS-21PS KS 120 21 EN/GL 1557 1468 1104 15 3/4" 9 3/4" 24 3/4" 267
5000 4-KS-25PS KS 120 25 EN/GL 1900 1800 1350! 15 3/4" 10 5/8" 24 3/4" 315 lbs.

* You can now get up to 1350 AH in one string. No paralleling of multiple strings, less time watering due to reduced number of cells and an expected life of 15 years!

6 Volt (3 Cell)
Rolls Batteries by Surrette

Series Model Plate Code Warranty
(months)
Plates per
cell
Separator Type Cap (100AH - 1.75 VPC) Cap (72AH - 1.75 VPC) Cap (20AH - 1.75 VPC) Length Width Height Wet
Weight
5000 6-CS-17P CS 120 17 EN/GL 770 726 546 22" 8 1/4" 18 1/4" 221 lbs.
5000 6-CS-21PS CS 120 21 EN/GL 963 908 683 22" 9 3/4" 18 1/4" 271 lbs.
5000 6-CS-25PS CS 120 25 EN/SL 1156 1091 820 22" 11.25" 18 1/4" 318 lbs.
4000 S-460* EKG 84 15 EN/GL 460 441 350 12 1/4" 7 1/8" 16 3/4" 117 lbs.
4000 S-530* EKG 84 17 EN/GL 530 504 400 12 1/4" 7 1/8" 16 3/4" 127 lbs.

8 Volt (4 Cell)

Series Model Plate Code Warranty
(months)
Plates per
cell
Separator Type Cap (100AH - 1.75 VPC) Cap (72AH - 1.75 VPC) Cap (20AH - 1.75 VPC) Length Width Height Wet
Weight
5000 8-CS-17PS CS 120 17 EN/SL 770 726 546 28 1/4" 8 1/4" 18 1/4" 294 lbs.
5000 8-CS-25PS CS 120 25 EN/SL 1156 1091 820 28 1/4" 11 1/4" 18 1/4" 424 lbs.

12 Volt (6 Cell)

Series Model Plate Code Warranty
(months)
Plates per
cell
Separator Type Cap (100AH - 1.75 VPC) Cap (72AH - 1.75 VPC) Cap (20AH - 1.75 VPC) Length Width Height Wet
Weight
5000 12-CS-11PS CS 120 11 EN/SL 503 475 357 22" 11 1/4" 18 1/4" 272 lbs.

All capacities based on specific gravities of 1.280.
Reduce capacity 5% for 1.256 specific gravity, and 10% for 1.250 specific gravity.

*These batteries do not come with cables or connectors which must be purchased separately


Click here for BBB Business Review ASE NESEA Member
Paypal Visa MasterCard Amex Discover
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams