SHOP ALL PRODUCTS
- FEATURED PRODUCTS
- Solar Panels
- Solar Power Systems
- Productos Solares en Puerto Rico
- Charge Controllers
- Inverters
- Deep Cycle Batteries
- Solar Panel Mounts
- MORE PRODUCTS
- Cables & Wiring
- Enclosures, Electrical & Safety
- Inverter Power Panels & PreWired Systems
- Meters, Communications & Site Analysis
- Portable Power Systems
- Solar Water Pumps
- Voltage Converters
- Wind Turbines
- Books & Education
- * Clearance Sale *
- Hot Deals
- Open Box & Refurb Deals
Morningstar ProStar PS-30M 30A, Charge Controller with Display GEN 3
Item code | Brand name | Model number | Amps |
MORPROSTAR-30M | Morningstar Corp | PS-30M | 30A |
Morningstar Corporation
ProStar PWM Charge Controller
12/24V, 30A with Display
PS-30M
Morningstar’s ProStar is the world’s leading mid-range solar controller for both professional and consumer applications. This second generation ProStar adds new features and protections using highly advanced technology. These improvements provide longer battery life and improved system performance. The ProStar line of controllers set new standards for reliability and self-diagnostics.
The new ProStar is available in 15 or 30 amps, 12/24 or 48 volt, and negative or positive ground. The controller may be paralleled for a solar input rating of up to 300 amps. An optional meter provides an extensive display of self-testing and system status.
Features:
- PWM series battery charging (not shunt)
- 3-position battery select: gel, sealed or flooded
- Very accurate control and measurement
- Jumper to eliminate telecom noise
- Tropicalization: conformal coating, stainless steel fasteners & anodized aluminum heat sink
- Current compensated low voltage disconnect (LVD)
- LED’s indicate battery status and faults
- Capable of 25% overloads
- 5 Year Warranty
Electronic Protections:
- Short-circuit — solar and load
- Overload — solar and load
- Reverse polarity
- Reverse current at night
- High voltage disconnect
- High temperature disconnect
- Lightning and transient surge protection
- Loads protected from voltage spikes
- Automatic recovery with all protections
New gen 3 improvements (vs Gen 2):
- RJ-11 MeterBus Port
- Data Logging up to 265 days
- Lighting Control
- Adjustable Load Control
- 7 Standard Charge Settings (vs. 3 on Gen2)
- Custom Settings
- Firmware Updates
- Protective Terminal Cover
- Eliminate PWM Noise in One Step
- Multi-Lingual Graphical Meter Option
- Compliant with IEC 62109
ProStar Model Specifications:
* Clicking on the model number will take you to that item's product pageModel | PS-15 | PS-15M | PS-30 | PS-30M |
Description | ProStar-15 Amp (12/24 Volt) |
ProStar-15 Amp with Meter (12/24 Volt) |
ProStar-30 Amp (12/24 Volt) |
ProStar-30 Amp with Meter (12/24 Volt) |
Rated Solar Current | 15 Amps | 15 Amps | 30 Amps | 30 Amps |
Rated Load Current | 15 Amps | 15 Amps | 30 Amps | 30 Amps |
System Voltage | 12 / 24 Volts | 12 / 24 Volts | 12 / 24 Volts | 12 / 24 Volts |
Mechanical Specifications | ||||
Weight: 12oz (0.34 kg) | ||||
Wire Size: #6 AWG (16 mm²) |
ProStar controller part numbers that end with an 'M' feature the optional digital meter display (PS-15M, PS-30M, PS-15M-48V).
Digital meter
- Highly accurate voltage and current display
- Low self-consumption (1 mA)
- Includes manual disconnect button
- Displays 5 different protection functions and disconnect conditions
- Self-diagnostics (self-test) provides a comprehensive test of the ProStar —
- Displays 9 different controller status parameters, including temperature
- Displays detected faults
Optimized Battery Charging:
The ProStar has 4 stages of charging to provide increased battery capacity and life.
Add-Ons
Add-Ons
Similar Products