Morningstar TS-MPPT-60-600V-48 Tristar 600V 60 Amp MPPT Charge Controller

Please Note: All images show OPTIONAL meter.This does not come with unit and must be purchased separately.

Morningstar Corporation
TriStar MPPT 600V Charge Controllers
TS-MPPT-60-600V-48

See our video with Morningstar and learn more about this 600V Solar Charge Controller!

The TS-MPPT-600V leverages Morningstar's TrakStar MPPT technology and 20 years of power electronics engineering excellence to deliver a PV controller with the widest PV input operating voltage range in the solar industry.

Morningstar’s advanced TrakStar MPPT technology helps to harvest the maximum energy from the solar array or wind turbine. The high-speed sweeping algorithm minimizes power loss and provides full visibility of the entire power curve from open circuit to battery voltage; ensuring the maximum power point is chosen under all ambient conditions.

Morningstar’s TriStar MPPT 600V charge controller is available with and without a DC Disconnect Box. Model TS-MPPT-60-600V-48-DB includes a compact on-board DC Disconnect Box, which helps to save on installation time and cost. The DC Disconnect Box enables the TriStar MPPT 600V charge controller to be used in either positively-grounded or negatively-grounded PV systems.

FEATURES:

Wide array input operating voltage range (100-525 V)

Maximum 60A continuous battery current

Supports nominal 48 Vdc batteries

Passively cooled for high reliability

Remote Temperature Sensor included (standard on both models)

Facilitates simple and cost-effective design (including savings on wiring and labor costs)

Advanced 4-stage charging algorithm optimizes battery health

Enables use of existing high voltage PV or small wind turbines for battery charging

Uses reliable, pre-established industry standard open communication protocols and true Ethernet-enabled functionality to help reduce operational costs and to increase integration efficiencies.

Certifications: CE, RoHS and REACH Compliant; ETL Listed [UL-1741 and Canadian CSA C22.2 No. 107.1.01]; Manufactured in a Certified ISO 9001 Facility

5 year Warranty

APPLICATIONS:

Off-grid PV systems greater than 150 Voc with long wire runs from the array to the controller

New installation grid-tie PV systems with battery back-up

Retrofitting string PV inverter systems to later add battery back-up without changing the PV array configuration

Battery-based Wind systems (**Coming soon- for larger off grid wind turbines (up to 15kWp) – up to 4 controllers in parallel on a single turbine)

ELECTRICAL CHARACTERISTICS:

SPECIFICATIONS
Peak Efficiency	97.5%
Maximum Battery Current	60A
Maximum Input Current	15A
Maximum Open Circuit Voltage	600V
Nominal Solar Input	3200Wp
Nominal System Voltage	48 Vdc
Battery Operating Voltage Range	16-72 Vdc
Input Operating Voltage Range	5-525 V
Self Consumption	1.75 - 2.5 W
Transient Surge Protection	4500 W / port
Ambient Operating Temperature	-40 °C to +45 °C

MECHANICAL CHARACTERISTICS:

SPECIFICATIONS
Maximum Wire Size - Power Terminals	14 AWG - 2 AWG
Maximum Wire Size - Sense Terminals	24 AWG - 16 AWG
Conduit Knockouts	M20; 1/2, 1, 1-1/4 inch (trade size)
Mounting	Vertical Surface
Enclosure Rating	Type 1 (indoor and vented)
Unit Weight	20 lbs/ 28 lbs (w/DC Disco)
Ports	Ethernet, EIA-485, RS-232, MeterBus
Supported Protocols	MeterBus, MODBUS RTU, MODBUS TCP/IP, HTTP, SNMP v2, SMTP
Information Display	MSView™ Software, Webpage Server, Email/Text Alerts