- FEATURED PRODUCTS
- Solar Panels
- Solar Power Systems
- Battery Backup Solar Power Systems
- Productos Solares en Puerto Rico
- Charge Controllers
- Deep Cycle Batteries
- MORE PRODUCTS
- Cables & Wiring
- Enclosures, Electrical & Safety
- Heat Pump Water Heaters
- Inverter Power Panels & PreWired Systems
- Meters, Communications & Site Analysis
- Portable Power Systems
- Solar Panel Mounts
- Solar Water Pumps
- Voltage Converters
- Wind Turbines
- Books & Educational Videos
- * Clearance Sale *
Morningstar TS-MPPT-60-600V-48 Tristar 600V 60 Amp MPPT Charge Controller, DC, TR
|Item code||Brand name||Model number||Amps|
TriStar MPPT 600V Charge Controller
TS-MPPT-60-600V-48-DB-TR (DC Disconnect Box, Transfer Switch)
See our videos with Morningstar and learn more about this 600V Solar Charge Controller!
Morningstar's latest version of their high voltage MPPT solar charge controller is available now with a DC Transfer Switch. This feature is fantastic for systems that were just set up as grid-tied. Now, during a power outage, you are able to switch from the grid-tie inverter that is in your system, to a battery back-up solution - with the flip of a switch. All hope is not lost ! Morningstar's TriStar MPPT Controller with DC Transfer Switch allows you to retrofit your grid-tied solar system with backup power. See our DC Coupled Kits for a simpler and more economical way to add backup to your grid-tied PV system.
Morningstar’s TriStar MPPT 600V Charge Controller can be used with higher voltage photovoltaic (PV) arrays, wind turbines or hydropower systems. The TS-MPPT-600V leverages Morningstar's TrakStar MPPT technology and 20 years of power electronics engineering excellence to deliver a PV controller with the widest PV input operating voltage range in the solar industry.
Morningstar’s advanced TrakStar MPPT technology helps to harvest the maximum energy from the solar array or wind turbine. The high-speed sweeping algorithm minimizes power loss and provides full visibility of the entire power curve from open circuit to battery voltage; ensuring the maximum power point is chosen under all ambient conditions.
Four versions of the 600V solar charge controller include: Standard; DC Disconnect Box included; DC Disconnect, and DC Transfer Switch included; DC Disonnect, DC Transfer Switch, and GFPD (Ground Fault Protection Device) included.
|Peak Efficiency||97.9%||Maximum Battery Current||60A|
|Maximum Input Current||15A||Maximum Open Circuit Voltage||600V|
|Nominal Solar Input||3200Wp||Nominal System Voltage||48 Vdc|
|Battery Operating Voltage Range||16-72 Vdc||Input Operating Voltage Range||5-525 V|
|Self Consumption||1.75 - 2.5 W||Transient Surge Protection||4500 W / port|
|Ambient Operating Temperature||-40 °C to +45 °C|
|Maximum Wire Size - Power Terminals||14 AWG - 2 AWG||Maximum Wire Size - Sense Terminals||24 AWG - 16 AWG|
|Conduit Knockouts||M20; 1/2, 1, 1-1/4 inch (trade size)||Mounting||Vertical Surface|
|Enclosure Rating||Type 1 (indoor and vented)||Unit Weight||28 lbs|
|Ports||Ethernet, EIA-485, RS-232, MeterBus||Supported Protocols||MeterBus, MODBUS RTU, MODBUS TCP/IP, HTTP, SNMP v2, SMTP|
|Information Display||MSView™ Software, Webpage Server, Email/Text Alerts|
The DC Disconnect Box on this model includes the following features:
Transfer Switch Diagram:
There are no reviews for this product.