Magnum Energy PT-100 100A MPPT Solar Charge Controller

Magnum Energy
100A Charge Controller
PT-100

The PT-100 from Magnum Energy is a the 1st 100A Maximum Power Point Tracker (MPPT) charge controller on the market! Designed to harvest the maximum available energy from the PV array, you can put your entire solar array (up to 6600W) on this one charge controller, without experiencing significant losses. The PT-100’s MPPT algorithm finds the maximum power point of the array and operates at this point while regulating the output current and battery voltage to fully charge the battery. Ideal for off-grid or back-up power applications. The PT-100 controllers are proudly assembled and tested in the United States at Magnum's facility in Everett, Washington.

Click on the PV Array Calculator to see how many PT-100 Charge Controllers you need for your array.

FEATURES:

Maximum Power Point Tracking (MPPT) technology for increased PV power output efficiency

Multi-state Charging for maximizes system performance and improves battery life

Optimal Battery Charging using an included external temperature sensor for optimum battery charging, even during extreme temperature changes

Compatible with 12, 24, or 48V battery systems with automatic detection of system voltage

GFDI: Integrated PV Ground-Fault Detection and Interruption/Indication, with pre-fault leakage/diagnostic metering

AFCI: An integrated PV Arc-Fault Circuit Interrupter detects, indicates, and extinguishes series arcs. The AFCI is designed to meet the new National Electric Code (NEC) Article 690.11 requirements

Extensive Electronic Protection: Over-temperature protection, power derating when temperature is high, PV short circuit and high PV input shutdown, output overcurrent protection and night-time back-feed (reverse current) protection

Supports large PV arrays - a single controller supports a large PV array up to 6600W

High Efficiency - provides higher than 99% conversion efficiency and uses less than two watts of power in nighttime mode

Multiple LED indicators and large digital LED screen on front panel for easy-to-read system information

Convenient Installation - Run all of the wiring to the unique, remain-in-place wiring box with ease prior to installing the full PT-100 unit

On-site Updates - The PT-100’s software can be updated on site

Easy MP and MMP integration - The PT-100 is designed to work with a Magnum Panel (MP) or Mini-Magnum Panel (MMP). It provides room and access to PV and battery disconnect breakers

Optional remote works with internal data-logging functionality that keeps energy harvest information and battery Ah/Wh data for up to 255 days

The ME-ARC50 is the remote needed for single inverter applications.  The ME-ARTR is needed/required for multiple Magnum inverter systems.  These are the only remotes that have menus to work w/the PT-100.

Included in box: PT-100 Charge Controller, 15' BTS (Battery Temp Sensor), 6' Network Communcication Cable (300V), 6' Extension Cable (300V), Back mount bracket (2 pieces) with 4 screws, Ground Fault Warning label, PT-100 Owners Manual

NOTE: See Documents Tab above for Networking Drawings for the PT-100.

PV Input Voltage Paramenters for the PT-100: (**CAUTION: Ensure the array’s Voc is kept below the Max PV Input Voltage level under any condition. Voltage above this level has a high probably of causing damage to the PT-100).