877-878-4060
SHOP ALL PRODUCTS
V

Outback MATE3 System Controller

Now remotely monitor your system w/the New OpticsRE !
$445.20

Estimate Shipping
 
Item code Brand name Model number
OUTMATE3 Outback MATE3

Outback Power SystemsOutback Power Systems
Mate3
Advanced System Display and Controller


The new MATE3 System Display and Controller makes it easier than ever to program and monitor your complete OutBack Power system. An intuitive user interface and integrated system configuration wizard make system setup and programming quick and seamless. The ability to set unique multi-level user passwords allows you to secure critical system settings from unintended changes while still allowing open access to necessary functions. Through the use of a single MATE3 you can remotely manage and monitor multiple inverter/chargers, charge controllers and DC monitoring devices.

Now you can monitor and control your system remotely - from any internet-enabled computer, tablet, or phone, with the NEW Optics RE from Outback ! Starting in 2015, all new Mate 3's will come pre-loaded with the Optics RE firmware. For Mate3's purchased after 3/1/14, the firmware upgrade is free. For Mate3's purchased prior to 3/1/14, there will be a $100 upgrade fee. Visit www.outbackpower.com for firmware updates and tech support for any upgrades. And also be sure to watch our videos below on the new Optics RE !

Click Here to see if your Mate3 qualifies for a FREE firmware upgrade!

See the "Documents" tab above for OpticsRE Setup Instructions.

Outback Mate3 System Display and ControllerProgram, Manage and Monitor Your Entire System!

  • User Friendly Interface
  • Intuitive Menu Structure
  • Easy-To-Read Graphical Display
  • System Configuration Wizard
  • Internet Enabled
  • Field Upgradable
  • Up to 1-Year of Data Logging
  • SD Memory Card Slot

The MATE3 is packed full of features to make system management simple. The easy-to-read graphical LCD display is backlit for dark operating conditions. Improved tactile buttons and a user programmable “favorite” key give you immediate access to the features you want, while an intuitive scroll wheel interface allows for easy adjustment of system setpoints. Expandable SD card memory allows you to increase data logging capacity as well as upgrade units in the field.

A built-in clock and calendar function enables timer-based programming of inverter and charger operation. This permits you to set the system to work with time-of-day power rates or to limit a generator’s run time to a specific time period of the day or week. All of your settings are stored in permanent memory to eliminate the need to reprogram in the event of a system shutdown or battery replacement. The MATE3 is an Internet enabled device - simply connecting to the Internet will allow full remote system monitoring via an easy-to-use web interface.

 


Specifications
Mate3
Display 4.0 x 1.2" full graphical display
Quick System Access 5 system operation hot keys, 1 user programmable hot key
Status Indicators Nine LED Status Indicators
Navigational Controls 5 navigational keys
Setpoint Adjustment Touch sensitive scroll wheel
Communication Protocol Proprietary OutBack Communications Protocol
Interconnection Cabling Standard CAT 5 network cable with RJ45 modular jack - 6' (2 m) included
PC Computer Interface Ethernet
Microprocessor 80 MHz 32 bit processor
Setpoint and Data Memory 8Mb RAM/ 64Mb of flash RAM
Clock/Calendar On-board real time clock with battery backup
Environmental Rating Indoor Type 1 (IP 30)
Maximum Cable Length 300 feet (100 m)

 

 

Outback Power Systems

 


Click here for BBB Business Review ASE NESEA Member
Paypal Visa MasterCard Amex Discover
McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams