{"product_id":"briggs-stratton-simpliphi-6-6-lithium-battery-6-65kwh-48v-lfp-052015","title":"Briggs \u0026 Stratton SimpliPHI 6.6 Lithium Battery, 6.65kWh 48V LFP – 052015","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e\n\u003cp\u003eThe Briggs \u0026amp; Stratton SimpliPHI 6.6 is a 48-volt lithium iron phosphate (LFP) battery module that stores 6.65 kWh of energy (6,656 Wh). It is the building block of the SimpliPHI 6.6 battery system. You stack one, two or three modules on top of each other. A SimpliPHI 6.6 controller goes on top, and a floor or wall base goes underneath. A full stack of three holds 19.95 kWh.\u003c\/p\u003e\n\u003cp\u003eThe modules connect to each other through built-in RapidStak connectors that carry power and communication, so there are no cables between modules in a stack. Briggs \u0026amp; Stratton says a stack of three can be assembled in under 5 minutes. The battery stores DC power. It connects to a 48 V battery inverter or hybrid inverter, which turns that power into AC power for your home. The inverter also recharges the battery from solar, the grid or a generator.\u003c\/p\u003e\n\u003cp\u003eBriggs \u0026amp; Stratton lists the battery for backup power, time-of-use savings, solar-plus-storage and off-grid power. A full system can grow to six stacks (18 modules, about 119.7 kWh).\u003c\/p\u003e\n\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHome backup:\u003c\/strong\u003e Store energy for use during utility outages as part of a properly designed backup system with a 48 V inverter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolar-plus-storage homes:\u003c\/strong\u003e Store daytime solar production for use in the evening and at night.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTime-of-use rate plans:\u003c\/strong\u003e Use stored energy when electricity costs the most. Briggs \u0026amp; Stratton lists time-of-use savings as an application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOff-grid homes:\u003c\/strong\u003e Briggs \u0026amp; Stratton lists off-grid power as an application. Size the battery bank and inverter for your loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGarage, utility room or outdoor installs:\u003c\/strong\u003e A complete stack is rated IP65, so it can go outdoors without a separate cabinet. Install only in the locations the manual allows (see Important Considerations).\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey Features \u0026amp; Specifications\u003c\/h3\u003e\n\u003ctable class=\"alte-spec-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003e48 V LFP battery module for the SimpliPHI 6.6 stackable battery system (controller and base sold separately)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003e052015 (Briggs \u0026amp; Stratton ordering number used on this listing)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated energy\u003c\/td\u003e\n\u003ctd\u003e6.65 kWh (6,656 Wh) per module. This is how much energy one module can store.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e130 Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal voltage \/ range\u003c\/td\u003e\n\u003ctd\u003e51.2 VDC (a \"48 V\" battery); 44.8–56.8 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContinuous current (per module)\u003c\/td\u003e\n\u003ctd\u003e130 A discharge; 100 A charge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSurge current\u003c\/td\u003e\n\u003ctd\u003e240 A for 2 seconds; 300 A for 1 second\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower by stack size\u003c\/td\u003e\n\u003ctd\u003e1 module: 6.65 kWh, 3.33 kW charge, 6.66 kW discharge (8.3 kW surge, 10 s). 2 modules: 13.3 kWh, 6.66 kW charge, 10.65 kW discharge. 3 modules: 19.95 kWh, 9.98 kW charge, 13.98 kW discharge (17.5 kW surge, 10 s).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCycle life\u003c\/td\u003e\n\u003ctd\u003e4,500 cycles at 100% depth of discharge (75% end-of-life capacity); 6,000 cycles at 80% depth of discharge (60% end-of-life capacity), at a 0.75C rate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRound-trip efficiency\u003c\/td\u003e\n\u003ctd\u003e96% or higher (at C\/2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature\u003c\/td\u003e\n\u003ctd\u003eCharge: 14°F to 122°F (−10°C to 50°C). Discharge: −4°F to 131°F (−20°C to 55°C).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScalability\u003c\/td\u003e\n\u003ctd\u003eUp to 3 modules per stack; up to 6 stacks and 18 modules per system. Parallel connection only.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInverter communication\u003c\/td\u003e\n\u003ctd\u003eThrough the SimpliPHI 6.6 controller: CAN bus and RS-485. Briggs \u0026amp; Stratton lists full integration with EG4, Growatt, Megarevo, Solis and Sol-Ark inverters, and non-communicating use with any 48 V lithium-supporting inverter.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003ePowder-coated steel; IP20 as a single module, IP65 when stacked\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions (module)\u003c\/td\u003e\n\u003ctd\u003e28.6 × 6.7 × 17.3 in (W × D × H); 18.9 in tall with tabs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull stack height\u003c\/td\u003e\n\u003ctd\u003eStack of three: 60.4 in with the single-access controller or 62.7 in with the dual-access controller (W 28.6 in × D 6.7 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e125 lb (56.7 kg) per module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL 9540 Edition 3, UL 9540A, UL 1973, UL 1998, UL 991, UN 38.3, UN 3480, IEC 62619\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e15-year battery warranty, per Briggs \u0026amp; Stratton's spec sheet (see Briggs \u0026amp; Stratton's warranty terms for details)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWhat You May Also Need\u003c\/h3\u003e\n\u003ch4\u003eUsually required\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/briggs-stratton-simpliphi-6-6-lithium-battery-controller\"\u003eSimpliPHI 6.6 Battery Controller\u003c\/a\u003e:\u003c\/strong\u003e Briggs \u0026amp; Stratton requires one controller on top of each stack. It holds the stack's power terminals and communication ports.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase for each stack:\u003c\/strong\u003e Each stack needs a Briggs \u0026amp; Stratton floor base or wall base underneath. The \u003ca href=\"\/products\/briggs-stratton-simpliphi-floor-mount-for-6-6-lithium-battery-system\"\u003eSimpliPHI Floor Mount for 6.6\u003c\/a\u003e is for floor installs in non-seismic zones only.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-voltage (48 V-class) battery inverter or hybrid inverter:\u003c\/strong\u003e Turns the battery's DC power into AC power and charges the battery. See the inverter communication row in the table, and check Briggs \u0026amp; Stratton's integration guides for your inverter model.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery cables:\u003c\/strong\u003e The manual lists red and black 4\/0 AWG cables (sized to code) and 3\/8 in closed-end power lugs as required parts that are not included. AltE carries \u003ca href=\"\/products\/4-0-awg-red-battery-cable-with-red-heatshrink-96-3-8-lug-1\"\u003ered\u003c\/a\u003e and \u003ca href=\"\/products\/4-0-awg-black-battery-cable-with-black-heatshrink-96-3-8-lug\"\u003eblack\u003c\/a\u003e 4\/0 AWG cables with 3\/8 in lugs; check that the lug style and length suit your install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMay be required\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/collections\/disconnects-breakers\"\u003eBattery disconnect\u003c\/a\u003e:\u003c\/strong\u003e The manual says a disconnect is needed between the stack and the charging equipment unless that equipment has a built-in battery disconnect. Size it to the device with the lower current rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMore SimpliPHI 6.6 modules:\u003c\/strong\u003e Add up to three per stack and up to 18 per system. Each new stack needs its own controller and base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/collections\/disconnects-breakers\"\u003eOvercurrent protection for each stack\u003c\/a\u003e:\u003c\/strong\u003e With two or more stacks in parallel, Briggs \u0026amp; Stratton's manual requires a DC overcurrent protection device between each stack and the combining busbar. Single-pole is required and double-pole is recommended. Size it to the NEC and your local code office's rules.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eOptional upgrades\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/briggs-stratton-simpliphi-energytrak-control-system-for-lithium-batteries\"\u003eEnergyTrak monitoring\u003c\/a\u003e:\u003c\/strong\u003e Briggs \u0026amp; Stratton's EnergyTrak gateway and app show battery status, fault alerts and over-the-air updates. The manual describes connecting the 6.6 controller to an EnergyTrak gateway.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCheck current manufacturer documentation before combining components, especially batteries, inverters, communications equipment and system-control hardware.\u003c\/p\u003e\n\n\u003ch3\u003eImportant Considerations\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot a complete system by itself.\u003c\/strong\u003e Every stack needs a SimpliPHI 6.6 controller on top and a floor or wall base underneath, both sold separately.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eParallel only.\u003c\/strong\u003e The system runs at 56.8 VDC or less. Never connect modules or stacks in series. Parallel stacks each need their own DC overcurrent protection device and cables of identical length and gauge, per the manual. Do not go over 6 controllers or 18 modules per system; Briggs \u0026amp; Stratton says doing so may damage the batteries and voids the warranty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhere it can go.\u003c\/strong\u003e The manual allows these locations: attached garages separated from living space; detached garages and accessory buildings; outdoors on exterior walls or the ground, at least 3 ft from doors and windows into the home; and utility closets or storage spaces where your local code office (AHJ) approves. It is not for living spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity limits per location.\u003c\/strong\u003e Under NFPA 855, the manual lists a maximum of 40 kWh in utility closets, basements and storage spaces, and 80 kWh in garages, accessory buildings and outdoors. Stacks must be at least 3 ft apart.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep away from salt air.\u003c\/strong\u003e Install more than half a mile from the ocean and out of saltwater spray. Damage from salt exposure isn't covered by the warranty.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCold weather.\u003c\/strong\u003e The battery won't charge below 14°F (−10°C). Briggs \u0026amp; Stratton recommends keeping it between 32°F and 104°F (0°C to 40°C) for best performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall upright and secure.\u003c\/strong\u003e Mount it vertically with less than 1° of tilt, on a non-flammable surface, following the NEC, NFPA 855 and local codes. A stack weighs between 150 and 435 lb.\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Briggs \u0026 Stratton","offers":[{"title":"Default Title","offer_id":46793452224731,"sku":"052015","price":3985.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/3365\/0395\/files\/simpliphi_6.6_battery_1.jpg?v=1747345859","url":"https:\/\/www.altestore.com\/products\/briggs-stratton-simpliphi-6-6-lithium-battery-6-65kwh-48v-lfp-052015","provider":"AltE Store","version":"1.0","type":"link"}