Best way to wire pannels

1 Posts
May 28, 2008 04:28 pm
Best way to wire pannels

I have 4 BP 3115 panels to use on a 24 volt inverter would it be better to wire 2 in series and then parallel them so that I have only one set of wires going to the combiner box or should I wire them in 2 separate series circuits?
 If I wire them up in parallel what size breaker should I use? the paper work gives an Isc of 7.5
 
578 Posts
May 28, 2008 04:39 pm
Re: Best way to wire pannels

two separate series circuits going to the combiner box, that should be right next to the modules.  that is the point of the combiner, to combine series strings in parallel and LEAVE with one set of positive, negative and ground, not enter.

so, two 15a din rail circuit breakers in a box like this will work. 

http://store.altenergystore.com/Enclosures-Electrical-and-Safety/Electrical-Enclosures/Combiner-Boxes/Midnite-Solar-MNPV6-Combiner-Box/p4566/

cheers,


james
Alt-E staff

AltE
"Making Renewable Do-able"
http://www.altEstore.com/

Tel: 877.878.4060 x107  or +1.978.562.5858 x107
Fax: 877.242.6718  or +1.978.562.5854
 

Disclaimer and Disclosure

The Alternative Energy Store, Inc reserves the right, within its sole discretion, to refuse or delete any posting or portion thereof, or terminate or block the access to this forum.

The opinions and statements posted on this forum are the opinions and statements of the person posting same, and do not constitute the opinion or act of the Alternative Energy Store, Inc (AltE). The Alternative Energy Store, Inc does not endorse or subscribe to any particular posting. No posting shall be construed as the act or opinion of the Alternative Energy Store, Inc.

Click here for BBB Business Review

McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Desktop Website | Mobile Website

Share

Click on an icon to share! If you don't see the method you want, hover over the orange "+".

Feedback

What can we do to help you?

Please enter a summary
Sorry, the copyright must be in the template.
Please notify this forum's administrator that this site is using an ILLEGAL copy of SMF!
Copyright removed!!