Add-Ons

Bergey Marine Environment Option for Xl1

1Tu18 60' Tilt Up Tower for Xl1

1Tu24 80' Tilt Up Tower for Xl1

1Tu30 100' Tilt Up Tower for Xl1

Delta La302 DC Lightning Arrestor

Bergey
BWC XL.1
1 Kilowatt Wind Turbine

Bergey Windpower's newest product is the 1,000 Watt BWC XL.1.  The BWC XL.1 is currently available only as a 24 VDC battery-charging system.

With a rotor diameter of 2.5 meters (8.2 ft) and a peak output of approximately 1,600 watts the XL.1 is intended for the off-grid home market in the U.S. and for rural electrification programs in developing countries. It is also a perfect upgrade system for current owners of micro-turbines, such as the Air 303 or 403.

The XL.1 combines a number of advanced technical features, including a completely new airfoil (patent pending), to provide the highest efficiency yet achieved in a small wind turbine at a cost of energy ~ 40% lower than the current price leader.  And, the XL.1 carries the exclusive, industry-leading, Bergey 5-year warranty. 

The XL.1 is an up-wind, horizontal-axis, three- bladed turbine.  The blades are pultruded fiberglass, a material that is over ten times stronger than the injection- molded plastic used on most small wind turbines.  In fact, pultrusions have a breaking strength exceeding 100,000 psi, which is twice as strong as normal steel.  "Just about any blade material will hold up in light to moderate winds.  But, when the storms come, weak blades can put the whole system at risk."  And the new BWC SH3045 airfoil makes the XL.1's blade probably the most efficient ever on a small wind turbine.  

he photo to the right shows an XL.1 installed by Brooks Solar (Chelan, WA) at a renewable energy trade fair in Oregon.

The blades attach directly to a specially designed very-low-speed permanent magnet alternator which uses state-of-the-art neodymium super- magnets.  "We have designed an oversized alternator that slows the rotor down and makes the turbine very quiet."  Overspeed protection is provided by the proven BWC AutoFurl passive sideways furling system.  "In spite of the claims otherwise, no other overspeed protection system has proven to be more reliable or effective than AutoFurl."    

The XL.1 includes the BWC PowerCenter controller which controls battery charging, has a low-end boost for superior low wind speed performance, "slow-mode" rotor idling when the batteries are full, an electrical braking system, and even includes a 30 A controller for the solar modules that are often a part of a complete hybrid system.  The PowerCenter allows an auxiliary or "dump" load to be connected to utilize excess wind (and/or solar) power after the batteries are fully charged.

Low wind speed performance is greatly enhanced by a low-end-boost circuit that optimally loads the wind turbine down to wind speeds as low as 5.6 mph (2.5 m/s).  Combined with the new blade system, this circuitry allows the XL.1 to produce useful power more than 6,000 hours a year at a typical site.  For reference, a typical solar system produces power 3,500 hours a year at a typical site.

The XL.1 is offered with a tubular Tilt-up tower in heights from 9 m (30 ft) to 32 m (104 ft).  These kits will be be easy to install and will offer customers a complete "ready to install" kit.  "There's been a need for more complete integration between turbine and tower packages for small wind turbines and we think our new line will fill that gap."

Specifications

Type:  3 Blade Upwind
Rotor Diameter:  2.5 m (8.2 ft.)
Start-up Wind Speed:  3 m/s (6.7 mph)
Cut-in Wind Speed:  2.5 m/s (5.6 mph)
Rated Wind Speed:  11 m/s (24.6 mph)
Rated Power:  1000 Watts
Maximum Power: ~ 1,300 Watts
Cut-Out Wind Speed:  None
Furling Wind Speed:  13 m/s (29 mph)
Max. Design Wind Speed:  54 m/s (120 mph)
Blade Pitch Control:  None, Fixed Pitch
Overspeed Protection:  AutoFurl
Gearbox:  None, Direct Drive
Temperature Range:  -40 to +60 Deg. C (-40 to +140 Deg. F)
Generator:  Permanent Magnet Alternator
Output Form: 24 VDC Nominal
Functional Features:b>  Low-End Boost, Slow-Mode, Electric Brake, 30A Solar Regulator, 60A Dump Load, Timed Battery Equalization, Watt Meter Display Mode, Polarity Checker 
Net Weight: 75lbs
Shipping Weight: 96 lbs

Shipping & Billing Information

Bergey wind turbines are built to order and typically shipped within 2-6 weeks. If paying by credit card, an initial pre-payment will be charged. One week prior to shipping the full amount will be charged.