| Item code | Model number |
| SOUTOW-30-WHI | 1-TWW-10-02 |
| Southwest
Windpower Whisper Tower - 30 Feet Guyed Tower Kits for the Whisper 100 & 200 |
 |
||||||||||||||||||||||||||||||||||||||||||||
|
| Part | Part | Quantity | |
| Tower Base | 3/8” Carriage Bolts | ||
| Upper Guy Wire set | Tower Insert | ||
| L Pivot Bolt and Nut | Pear Connecting Link | ||
| Lower Guy Wire set | Turbine Mount Coupler | ||
| 3/8” x 2 ½” Bolts | Tower Base Coupler | ||
| 3/8” x 4” Bolts | Gin Base Coupler | ||
| 3/8” Lock-nuts | Gin Pole Top Piece | ||
| Cable Thimbles | 4 link Chain | ||
| Cable Clamps | Connecting Link | ||
| Rope |
Note: Kit Contents may change without notice.
Anchors
Tubing or Pipe for Tower
Ground Rod and Clamp
Lightning Arrestor*
Electrical Wire
Wire Connectors (preferably copper split bolts)
Pipe Insulation (to prevent wire “rattle” inside pole) *
Electrical tape or heat shrink tubing
*Optional items
Tower Kits use 2.5" CQ40 fence pipe (available from any chain link fence company) or 2.5" schedule 40 water pipe (fence & water pipe actual outer diameter is 2.875"). For detailed assembly instructions, see the Tower Manual in PDF format below.
Raising the tower with a gin pole, wind generator in place
Watch the video! "How to Raise the Wind Turbine"
The second tower kit installed as easily as the first one did. The quality of materials in the kit is excellent and the accompanying instructions are very clear. This kit was stretched to 40ft of height as well, with adequate cable length for the mod
Read the full review
I found the quality of materials to be excellent, and found that it can be stretched to 40ft, since excess cable is supplied with the kit. The pipe for the tower mast must be purchased separately and generally come as a standard 21ft length. The kit
Details
Do you own this product? Write a review
