Southwest Windpower Whisper Tower - 24 Feet Guyed Tower Kit for the Whisper 100 & 200
Tower Kit Contents Part Quantity Tower Base 1 Guy Wire set 1 Pivot Bolt and Nut 1 Tower Insert (included with turbine) 1 3/8” x 2” Bolts 2 3/8” x 3 ½” Bolts 2 3/8” Lock-nuts 12 Cable Thimbles 4 Cable Clamps 12 Tower Base Coupler 1 3/8” Carriage Bolts 8 Note: Kit Contents may change without notice.

24' Tower Kit Components

Necessary items not included in this kit:

Earth Anchors
Tubing or Pipe for Tower
Ground Rod and Clamp
Lightning Arrestor*
Electrical Wire
Wire Connectors (preferably copper split bolts)
Pipe Insulation (to prevent wire “rattle” inside pole) *
Electrical tape

*Optional items

Specifications

• Pole Length: 1x24'
• Guy Radius: 15'
• Auger Size: 36" (not included)
• Anchor Hole: 2' diameter x 3' deep x 9" concrete

Pipe Requirements

Tower Kits use 2.5" CQ40 fence pipe (available from any chain link fence company) or 2.5" schedule 40 water pipe (fence & water pipe actual outer diameter is 2.875"). For detailed assembly instructions, see the Tower Manual in PDF format below.

Raising the tower with a ladder as a gin pole, wind generator in place

Watch the video! "How to Raise the Wind Turbine"