Southwest Wind Power Roof Mount Tower Kit (WITH SEAL)

Need help selecting components and designing your system?
Give our Knowledgeable Sales Folks a call at 877-878-4060.

Basic Stats click to view hide

Our Code: SOUAIR-RF/TK

If you own this product write a review!

Rating:

This kit was pretty straightforward to install, and should only take a day if you get started early Continue...

Better than Expected by Toni & Greg B

Rating:

I was skeptical @ first, but this kit worked far better than expected. It was fairly easy to install Continue...

These items are commonly used with the Southwest Wind Power Roof Mount Tower Kit (WITH SEAL)

Add-Ons

Roof seal INCLUDED

Southwest Windpower AIR403 Roof Mount Kit
Simple roof top tower mounts offer easy low cost installation for single or multiple AIR wind generators. These kits are designed with effective built-in vitabration isolation mounts. Installs on the side of a building or through the roof. An optional roof seal is available. Kits include: Isolators, Base Plates, Clamp Sleeves, Clamp Straps, 5/16 x 1 Bolts, 5/16 Lock Washers, Safety Leashes, Optional Roof Seal included
	These tower kits can be used to mount your AIR403 through the roof of a building or along the side of a building. If the wind generator will be mount through the roof, the roof seal is strongly recommended. None of the kits include the lag bolts that connect the tower to the building or the mounting pole (1 1/2" schedule 40 aluminum or schedule 20 steel pipe must be used).
Four industrial grade vibration isolator reduce mechanically transmitted noise by 80%.
Parts List
Your Roof Mount Kit includes: Isolators Base Plates Clamp Inserts Clamp Straps 5/16” x 1” Bolts 5/16” Lock Washers Safety Leash Optional Roof Seal	Quantity 4 2 2 2 4 4 2 1

Choose your site. Unpack your new AIR 403 wind module and roof mount kit.
Mount Isolators to building side or roof truss (cut hole and install roof seal for roof mounts). Assemble clamps, insert pipe.
Assemble your AIR wind module and mount on pipe.